โรงเลื่อยไม้ครบชุด (แบบตั้งอยู่กับที่)ALMAB
5000/4000
โรงเลื่อยไม้ครบชุด (แบบตั้งอยู่กับที่)
ALMAB
5000/4000
ปีที่ผลิต
2002
สภาพ
ใช้แล้ว
(ทำงานได้เต็มประสิทธิภาพ)
ที่ตั้ง
Schwäbisch Gmünd 

ข้อมูลเกี่ยวกับเครื่องจักร
- ชื่อเครื่องจักร:
- โรงเลื่อยไม้ครบชุด (แบบตั้งอยู่กับที่)
- ผู้ผลิต:
- ALMAB
- รุ่น:
- 5000/4000
- หมายเลขเครื่องจักร:
- 001
- ปีที่ผลิต:
- 2002
- สภาพ:
- ใช้แล้ว
- ประสิทธิภาพการทำงาน:
- ทำงานได้เต็มประสิทธิภาพ
ราคาและสถานที่
- ที่ตั้ง:
- Egental 8, 73529 Schwäbisch Gmünd, Deutschland

โทร
รายละเอียดทางเทคนิค
- ความยาวการตัด (สูงสุด):
- 5,000 มม
รายละเอียดข้อเสนอ
- รหัสประกาศ:
- A22009028
- หมายเลขอ้างอิง:
- Trimmer und Stapelanlagen
- อัปเดต:
- อัปเดตล่าสุดเมื่อ 29.07.2569
คำอธิบาย
Offered is an automatic edge trimming line with singulation, trimmer for cross-cutting, 2 stacking machines, additional discharge, and trimming of stacking slats:
Boards 2000-5280 mm long, 16 - 40 mm thick, 70 - 260 mm wide, cycle rate of 29 or 58 pieces/minute, operated by one person sitting at the joystick:
- Cross-transfer of boards with a 4-strand chain cross conveyor
- Singulation inclined conveyor 6000 mm wide, 3000 mm at an angle
- Alignment roller conveyor
- Chain cross conveyor as a layer former
- Star turners and sorters before the trimmer
- Edge detection (ALFHA edger)
- Trimmer with 11 saws in a 50.5 cm grid: The operator (sitting) at the joystick evaluates:
without re-trimming, 5000 mm to stacking machine 1, alternatively: without re-trimming, 4000 mm to stacking machine 1
Bjdjy Uzhfspfx Aikowt
with re-trimming, 4000 mm to stacking machine 2 with re-trimming, 3000 mm to stacking machine 2
with re-trimming, short lengths for discharge into a box with re-trimming, short lengths for discharge into a box
with re-trimming, 2 or 3 x 101 cm for stacking slats with re-trimming, 2 or 3 x 101 cm for stacking slats
or waste cut - cut length 505 mm for the underlying vibration trough
- 2 stacking machines: 1 x 2500 to 5280 mm and 1 x 2000 to 4280 mm
- Automatic lowering of finished packages and transfer to automatic strapping
- FROMM strapping with 16 mm plastic band and automatic transfer to the discharge roller conveyor
- ALFHA control system with Siemens S 7 - ensures perfect operation. Performance records/daily logs
- Control cabinets with Siemens components, SEW motors, Telco light barriers
For example, one employee, processing side boards of 4000/17 x 76 mm, produced, packaged, and strapped approximately 15,000 boards in 9 hours.
The system is still assembled, but the upstream chipper has already been dismantled. Therefore, the system is immediately available. It is very robustly built and has always operated smoothly and without any problems.
We can provide a process video via WhatsApp!
โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้
Boards 2000-5280 mm long, 16 - 40 mm thick, 70 - 260 mm wide, cycle rate of 29 or 58 pieces/minute, operated by one person sitting at the joystick:
- Cross-transfer of boards with a 4-strand chain cross conveyor
- Singulation inclined conveyor 6000 mm wide, 3000 mm at an angle
- Alignment roller conveyor
- Chain cross conveyor as a layer former
- Star turners and sorters before the trimmer
- Edge detection (ALFHA edger)
- Trimmer with 11 saws in a 50.5 cm grid: The operator (sitting) at the joystick evaluates:
without re-trimming, 5000 mm to stacking machine 1, alternatively: without re-trimming, 4000 mm to stacking machine 1
Bjdjy Uzhfspfx Aikowt
with re-trimming, 4000 mm to stacking machine 2 with re-trimming, 3000 mm to stacking machine 2
with re-trimming, short lengths for discharge into a box with re-trimming, short lengths for discharge into a box
with re-trimming, 2 or 3 x 101 cm for stacking slats with re-trimming, 2 or 3 x 101 cm for stacking slats
or waste cut - cut length 505 mm for the underlying vibration trough
- 2 stacking machines: 1 x 2500 to 5280 mm and 1 x 2000 to 4280 mm
- Automatic lowering of finished packages and transfer to automatic strapping
- FROMM strapping with 16 mm plastic band and automatic transfer to the discharge roller conveyor
- ALFHA control system with Siemens S 7 - ensures perfect operation. Performance records/daily logs
- Control cabinets with Siemens components, SEW motors, Telco light barriers
For example, one employee, processing side boards of 4000/17 x 76 mm, produced, packaged, and strapped approximately 15,000 boards in 9 hours.
The system is still assembled, but the upstream chipper has already been dismantled. Therefore, the system is immediately available. It is very robustly built and has always operated smoothly and without any problems.
We can provide a process video via WhatsApp!
โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้
ผู้จัดหา
หมายเหตุ: ลงทะเบียนฟรีหรือเข้าสู่ระบบ, เพื่อเข้าถึงข้อมูลทั้งหมด
ลงทะเบียนตั้งแต่: 2014
3 ประกาศออนไลน์
ส่งคำขอ
โทรศัพท์ & แฟกซ์
+49 7332 ... โฆษณา
โฆษณาเหล่านี้อาจน่าสนใจสำหรับคุณด้วยเช่นกัน
โฆษณาขนาดเล็ก
Schwäbisch Gmünd
8,779 km
ระบบซ้อนทับพร้อมเครื่องตัดแต่ง
ALMAB-Stapelanlage5000 / 4000
ALMAB-Stapelanlage5000 / 4000
โฆษณาขนาดเล็ก
อิตาลี
8,720 km
เครื่องแมชชีนนิ่งเซ็นเตอร์พร้อมโต๊ะคอนโซล
BIESSEROVER C 6.40
BIESSEROVER C 6.40
โฆษณาขนาดเล็ก
Malé Výkleky
8,349 km
เครื่องย่อยไม้
SG strojírny500
SG strojírny500
โฆษณาขนาดเล็ก
Miechucino
8,136 km
เลื่อยหลายใบแบบสองเพลาพร้อมกลไก
SocolestDAS 200
SocolestDAS 200
โฆษณาขนาดเล็ก
Jüri
7,717 km
เครื่องเลื่อยไม้พร้อมหัวเครื่องย่อยไม้
Veisto OYHewSaw R200
Veisto OYHewSaw R200
โฆษณาขนาดเล็ก
Grünau im Almtal
8,498 km
เครื่องลอกเปลือกไม้
BalzBG90
BalzBG90
โฆษณาขนาดเล็ก
Nattheim
8,753 km
เส้นข้อต่อนิ้ว
โฆษณาขนาดเล็ก
Velké Karlovice
8,162 km
เครื่องจักรในลานไม้ซุง
unknownML-35
unknownML-35
โฆษณาขนาดเล็ก
Cegléd
8,071 km
โรงเลื่อยสำเร็จรูป
Costa Multiprisma
Costa Multiprisma
โฆษณาขนาดเล็ก
Jonava
7,731 km
รถยกบอร์ด
Brettstapler
Brettstapler
ประกาศของคุณถูกลบเรียบร้อยแล้ว
เกิดข้อผิดพลาด















































































































































