เครื่อง EDM แบบลวด

CHARMILLES Robofil 2030 SI

TECHNICAL DETAILS
X-axis travel: 318 mm
Y-axis travel: 218 mm
Z-axis travel: 114 mm
U-axis travel: ± 48 mm
V-axis travel: ± 48 mm
Control system: PC-based, 14" color monitor, MS-DOS
Cone pitch/height: ±30° / 65 mm

Workspace
Type: Tub with swing door
Max. workpiece dimensions (W × D × H): 1,130 × 510 × 260 mm
Door width: 1,010 mm
Max. workpiece weight: 500 kg
Table dimensions (W × D): 560 × 440 mm
Distance floor to table: 1,050 mm
Dielectric volume: 240 l
Dielectric level control: Automatic

Wire EDM system
Wire diameter: 0.10 – 0.25 mm
Wire guide type: Diamond-enclosed guide, backlash-free
Programmable wire unwinding speed: 0.2 to 15 m/min
Programmable wire tension: 0.3 to 3 daN
Permissible coil weights and types (according to DIN): 1.6 kg
Permissible coil weight and types (according to JIS): 3 kg
Recovery of used wire: Wire shredding at the back
Automatic threading for wire diameters: 0.050 to 0.300 mm
Automatic rethreading for wire diameters: 0.070 to 0.300 mm
Minimum hole diameter for threading: 0.300 mm for 0.250 mm wire

dielectric
Type: Deionized water
Total volume of the dielectric: 900 l
Dielectric temperature: ±0.5 °C
Cartridge filters: 16
Volume of deionizing resin filling: 30 l
Deionization control: Automatic
Number of deionization bottles: 3
Spray pressure range: 0 – 20 bar
Number of programmable pressure levels: 16

generator
Max. processing speed (material: steel, wire: SW30X): 300 mm²/min
Min. surface roughness (material: steel, height: 20 mm): 0.12 µm Ra
Min. surface roughness (material: carbide, height: 20 mm): 0.1 µm Ra
Available technologies: steel, cemented carbide, copper, graphite, aluminum, PCD, copper-tungsten

MACHINE DETAILS
Machine dimensions (L × W × H): 3,690 × 2,520 × 2,290 mm
Weight (without dielectric): 4,400 kg

Input voltage: 380/400 V
Power consumption: 12 kVA