ตู้ทดสอบอุณหภูมิCTS
TSR-30/1000
ตู้ทดสอบอุณหภูมิ
CTS
TSR-30/1000
สภาพ
ใช้แล้ว
ที่ตั้ง
Borken 

รูปภาพแสดงให้เห็น
แสดงแผนที่
ข้อมูลเกี่ยวกับเครื่องจักร
ราคาและสถานที่
- ที่ตั้ง:
- Einsteinstraße 8a, 46325 Borken, Deutschland

โทร
รายละเอียดข้อเสนอ
- รหัสประกาศ:
- A14926978
- หมายเลขอ้างอิง:
- 23988
- อัปเดต:
- อัปเดตล่าสุดเมื่อ 15.11.2567
คำอธิบาย
CTS
Type: TSR-30/1000
Water-cooled
The type designation of the CTS enclosure series is made up as follows:
z. e.g. type TSR -30/1000
1) T means: Temperature
2) S means: stress screening
Bcjdpfx Asrivfceg Sou
3) R means: external conditioning
4) -30 means: lower temperature -30 °C
5) 1000 means: 1000 liter test chamber volume
Technical performance data:
A) TSR-30/1000 basic device without hose connections,
i.e. when used as a stand-alone temperature test chamber
Temperature tests:
Temperature range -40°C to +180°C
Final temperature -45°C
Temperature deviation ≤ ±0.3 K in time
Temperature change rate according to IEC 60068-3-5
Heating 6.0 K/min
Cooling 5.0 K/min
Heat radiation
approx. 5000 W at +20°C
approx. 4200 W at ± 0°C
approx. 3000 W at -20°C
The technical data refer to an ambient temperature of +25 °C,
rated voltage 400V, without test material, without irradiation and without additional equipment.
Air volume flow
approx.2000m³/h
B) TSR-30/1000 basic unit with hose connections,
for connection to an external test room provided by the customer
Temperature tests:
Temperature range -30°C to +170°C
Temperature deviation ≤ ±0.1 to 0.5 K in time
Average rate of temperature change,
measured with short-circuited circuit
Heating 4.0 K/min
Cooling 4.0 K/min
in the range from +150°C to -10°C
The technical data refer to an ambient temperature of +25 °C,
rated voltage 400V, without test material, without irradiation and without additional equipment,
measured with short-circuited circuit
Attention: The external test chamber provided by the customer must be absolutely tight and appropriately insulated,
any feed-throughs must be optimally sealed on site.
Dimensions:
Test volume 1000 liters
Air circulation connection Ø 200 mm
Test chamber dimensions Height 900 mm Width 1000 mm Depth 1100 mm
External dimensions Height 1950 mm Width 1270 mm Depth 2245 mm
Technical design:
Refrigeration unit:
water-cooled, low-noise, fully hermetic
Infinitely variable capacity adjustment through
electronic monitoring and control system,
environmentally friendly refrigerant R404A
Door:
Fully opening door, door hinge on the left,
one-handed operation, lockable.
Shelf:
Stainless steel, support surface 970 x 980 mm
Max. load per shelf 35 kg
Total load with max. shelf load 100 kg
Test area lighting: Halogen lamp 20 W, 12 V
Control:
- 32 bit controller
- LCD control panel
Operating data:
Electrical connection 400 V +6/-10 %, 3/N, 50 Hz
Rated power 13.3 kW
Protection class IP 22
Sound pressure level < 60 dB(A)
Weight approx. 850 kg
The following information is for your safety as a buyer!
The following points are carried out on our offered chambers in advance:
1. functional check and replacement of necessary components
2. if necessary, refilling with legally compliant refrigerant
3. leak test with certificate
4. after successful inspection, the chambers are subjected to a documented test run.
Condition: used
Scope of delivery: (see picture)
(Changes and errors in the technical data, specifications are reserved!)
We will be happy to answer any further questions you may have on the phone.
โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้
Type: TSR-30/1000
Water-cooled
The type designation of the CTS enclosure series is made up as follows:
z. e.g. type TSR -30/1000
1) T means: Temperature
2) S means: stress screening
Bcjdpfx Asrivfceg Sou
3) R means: external conditioning
4) -30 means: lower temperature -30 °C
5) 1000 means: 1000 liter test chamber volume
Technical performance data:
A) TSR-30/1000 basic device without hose connections,
i.e. when used as a stand-alone temperature test chamber
Temperature tests:
Temperature range -40°C to +180°C
Final temperature -45°C
Temperature deviation ≤ ±0.3 K in time
Temperature change rate according to IEC 60068-3-5
Heating 6.0 K/min
Cooling 5.0 K/min
Heat radiation
approx. 5000 W at +20°C
approx. 4200 W at ± 0°C
approx. 3000 W at -20°C
The technical data refer to an ambient temperature of +25 °C,
rated voltage 400V, without test material, without irradiation and without additional equipment.
Air volume flow
approx.2000m³/h
B) TSR-30/1000 basic unit with hose connections,
for connection to an external test room provided by the customer
Temperature tests:
Temperature range -30°C to +170°C
Temperature deviation ≤ ±0.1 to 0.5 K in time
Average rate of temperature change,
measured with short-circuited circuit
Heating 4.0 K/min
Cooling 4.0 K/min
in the range from +150°C to -10°C
The technical data refer to an ambient temperature of +25 °C,
rated voltage 400V, without test material, without irradiation and without additional equipment,
measured with short-circuited circuit
Attention: The external test chamber provided by the customer must be absolutely tight and appropriately insulated,
any feed-throughs must be optimally sealed on site.
Dimensions:
Test volume 1000 liters
Air circulation connection Ø 200 mm
Test chamber dimensions Height 900 mm Width 1000 mm Depth 1100 mm
External dimensions Height 1950 mm Width 1270 mm Depth 2245 mm
Technical design:
Refrigeration unit:
water-cooled, low-noise, fully hermetic
Infinitely variable capacity adjustment through
electronic monitoring and control system,
environmentally friendly refrigerant R404A
Door:
Fully opening door, door hinge on the left,
one-handed operation, lockable.
Shelf:
Stainless steel, support surface 970 x 980 mm
Max. load per shelf 35 kg
Total load with max. shelf load 100 kg
Test area lighting: Halogen lamp 20 W, 12 V
Control:
- 32 bit controller
- LCD control panel
Operating data:
Electrical connection 400 V +6/-10 %, 3/N, 50 Hz
Rated power 13.3 kW
Protection class IP 22
Sound pressure level < 60 dB(A)
Weight approx. 850 kg
The following information is for your safety as a buyer!
The following points are carried out on our offered chambers in advance:
1. functional check and replacement of necessary components
2. if necessary, refilling with legally compliant refrigerant
3. leak test with certificate
4. after successful inspection, the chambers are subjected to a documented test run.
Condition: used
Scope of delivery: (see picture)
(Changes and errors in the technical data, specifications are reserved!)
We will be happy to answer any further questions you may have on the phone.
โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้
ผู้จัดหา
หมายเหตุ: ลงทะเบียนฟรีหรือเข้าสู่ระบบ, เพื่อเข้าถึงข้อมูลทั้งหมด
ลงทะเบียนตั้งแต่: 2012
ส่งคำขอ
โทรศัพท์ & แฟกซ์
+49 2861 ... โฆษณา
โฆษณาเหล่านี้อาจน่าสนใจสำหรับคุณด้วยเช่นกัน
โฆษณาขนาดเล็ก
Eggstätt
8,614 km
เครื่องกัด
AlzmetallGS 600-T 5
AlzmetallGS 600-T 5
โฆษณาขนาดเล็ก
Cloppenburg
8,811 km
2019 DMG Mori Lasertec 30 SLM รุ่นที่ 2
DMG MoriLasertec 30 SLM 2nd Generation
DMG MoriLasertec 30 SLM 2nd Generation
โฆษณาขนาดเล็ก
Courbevoie
9,314 km
ศูนย์เครื่องจักรกลแนวตั้ง
mikronVCP600
mikronVCP600
โฆษณาขนาดเล็ก
เยอรมนี
8,550 km
อุปกรณ์อุ่น-หดเครื่องมือ
BilzISG 3200-WK
BilzISG 3200-WK
โฆษณาขนาดเล็ก
Berlin
8,468 km
เครื่องฉีดขึ้นรูปแนวตั้ง
ENGELe-insert 740H/60 single-C
ENGELe-insert 740H/60 single-C
โฆษณาขนาดเล็ก
Deutschland
8,687 km
เครื่องฉีดขึ้นรูป
ArburgALLROUNDER CENTEX 320C 500-250 VO
ArburgALLROUNDER CENTEX 320C 500-250 VO
โฆษณาขนาดเล็ก
Emmelshausen
8,910 km
เครื่องกลึง
GildemeisterCTX beta 1250 4 A
GildemeisterCTX beta 1250 4 A
โฆษณาขนาดเล็ก
Beringen
8,896 km
ผู้ให้บริการพาเลท
MIKRONHSM 400
MIKRONHSM 400
โฆษณาขนาดเล็ก
Pfullingen
8,831 km
ศูนย์เครื่องจักรกล
ABENEVHF 330 TNC 620
ABENEVHF 330 TNC 620
โฆษณาขนาดเล็ก
Meiningen
8,699 km
เครื่องอบแห้งสี DIN 1539 300°C
VötschVTL 100/150 nach DIN 1539
VötschVTL 100/150 nach DIN 1539
ประกาศของคุณถูกลบเรียบร้อยแล้ว
เกิดข้อผิดพลาด













































































