เครื่องดัดขึ้นรูปโปรไฟล์ - เครื่องม้วนสามลูกกลิ้งCurvatrice
DS60
เครื่องดัดขึ้นรูปโปรไฟล์ - เครื่องม้วนสามลูกกลิ้ง
Curvatrice
DS60
EXW VB ยังไม่รวมภาษีมูลค่าเพิ่ม
€2,950
ปีที่ผลิต
2000
สภาพ
ใช้แล้ว
(ทำงานได้เต็มประสิทธิภาพ)
ที่ตั้ง
Metelen 

ข้อมูลพื้นฐาน
- ชื่อเครื่องจักร:
- เครื่องดัดขึ้นรูปโปรไฟล์ - เครื่องม้วนสามลูกกลิ้ง
- ผู้ผลิต:
- Curvatrice
- รุ่น:
- DS60
- ปีที่ผลิต:
- 2000
- สภาพ:
- สภาพดี (มือสอง)
- ประสิทธิภาพการทำงาน:
- ทำงานได้เต็มประสิทธิภาพ
ราคาและสถานที่
EXW VB ยังไม่รวมภาษีมูลค่าเพิ่ม
€2,950
- ที่ตั้ง:
- Metelen, เยอรมนี

โทร
รายละเอียดข้อเสนอ
- รหัสประกาศ:
- A23348291
- อัปเดต:
- อัปเดตล่าสุดเมื่อ 18.11.2569
คำอธิบาย
Profile Bending Machine SAF Curvatrici (TUWI) DS 60 HV – Ready for Use & with Special Modification
Manufacturer: Curvatrice s.r.l.
Model: DS60
Type: HV
Serial Number: 050G 1182
Iodpfs Akvcdsx Afasii
Year of Manufacture: 2000
For sale is a reliable and immediately ready-to-use profile bending machine, type SAF Curvatrici (TUWI) DS 60 HV. We acquired the machine second-hand in 2012 and it has been continuously and well-maintained in our possession ever since.
We would be happy to demonstrate the machine on-site after prior arrangement.
Equipment & Scope of Supply:
• Rollers: Supplied including the standard rollers shown in the pictures (suitable for flat steel and U-profiles with flanges on the inside and outside). Further profiles require corresponding special tools.
12 spacer washers approx. round 78 x 3 mm
10 spacer washers approx. round 78 x 2 mm
40 spacer washers approx. round 78 x 1 mm
• Basic equipment: Original, laterally and height-adjustable guide rollers/shafts (34 x 270 mm) are included in the scope of supply.
• Special Modification for Transport & Installation: Specially manufactured, sturdy base frame for uncomplicated transport, including four height-adjustable leveling screws for precise alignment.
• Additional Modifications: An 8 mm thick steel plate has been mounted on the top side for the possible mounting of further attachments. In addition, a subsequently attached protective plate on the feed shaft reliably protects the slides from contamination.
Operation & Control:
• Separate control panel with digital position display for the upper roller
• Hydraulic feed/adjustment of the upper roller (controlled via operating buttons)
• Practical foot pedals for the rolling direction (left/right)
• Integrated emergency stop switch
Technical Data:
• Drive: 2.6 / 3.2 kW brake motor
• Speed: 2 stages (8 and 16 RPM)
• Shaft diameter: 50 mm (all three axes hardened and ground)
• Acceptance height: 115 mm
• Dimensions (H x W x L): approx. 1,360 x 750 x 1,500 mm
• Weight: approx. 425 kg
Important Notes:
• The performance data according to the manufacturer's brochure refers to a material strength of 40 kg/mm² (depending on the respective bending radius). These values are to be understood as approximate guidelines and are not binding. We will gladly send you the technical data sheet for the maximum possible bending capacities upon request.
• An operating manual is unfortunately no longer included in the scope of supply.
Sales and Delivery Conditions:
• Pricing: Ex Works (net, plus VAT).
• Logistics: Loading and collection must be organized and carried out by the buyer himself or by a forwarding agent commissioned by him.
• Technical specifications according to available documents. Subject to prior sale.
If you are interested or have any questions, we look forward to hearing from you to arrange a viewing appointment!
โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้
Manufacturer: Curvatrice s.r.l.
Model: DS60
Type: HV
Serial Number: 050G 1182
Iodpfs Akvcdsx Afasii
Year of Manufacture: 2000
For sale is a reliable and immediately ready-to-use profile bending machine, type SAF Curvatrici (TUWI) DS 60 HV. We acquired the machine second-hand in 2012 and it has been continuously and well-maintained in our possession ever since.
We would be happy to demonstrate the machine on-site after prior arrangement.
Equipment & Scope of Supply:
• Rollers: Supplied including the standard rollers shown in the pictures (suitable for flat steel and U-profiles with flanges on the inside and outside). Further profiles require corresponding special tools.
12 spacer washers approx. round 78 x 3 mm
10 spacer washers approx. round 78 x 2 mm
40 spacer washers approx. round 78 x 1 mm
• Basic equipment: Original, laterally and height-adjustable guide rollers/shafts (34 x 270 mm) are included in the scope of supply.
• Special Modification for Transport & Installation: Specially manufactured, sturdy base frame for uncomplicated transport, including four height-adjustable leveling screws for precise alignment.
• Additional Modifications: An 8 mm thick steel plate has been mounted on the top side for the possible mounting of further attachments. In addition, a subsequently attached protective plate on the feed shaft reliably protects the slides from contamination.
Operation & Control:
• Separate control panel with digital position display for the upper roller
• Hydraulic feed/adjustment of the upper roller (controlled via operating buttons)
• Practical foot pedals for the rolling direction (left/right)
• Integrated emergency stop switch
Technical Data:
• Drive: 2.6 / 3.2 kW brake motor
• Speed: 2 stages (8 and 16 RPM)
• Shaft diameter: 50 mm (all three axes hardened and ground)
• Acceptance height: 115 mm
• Dimensions (H x W x L): approx. 1,360 x 750 x 1,500 mm
• Weight: approx. 425 kg
Important Notes:
• The performance data according to the manufacturer's brochure refers to a material strength of 40 kg/mm² (depending on the respective bending radius). These values are to be understood as approximate guidelines and are not binding. We will gladly send you the technical data sheet for the maximum possible bending capacities upon request.
• An operating manual is unfortunately no longer included in the scope of supply.
Sales and Delivery Conditions:
• Pricing: Ex Works (net, plus VAT).
• Logistics: Loading and collection must be organized and carried out by the buyer himself or by a forwarding agent commissioned by him.
• Technical specifications according to available documents. Subject to prior sale.
If you are interested or have any questions, we look forward to hearing from you to arrange a viewing appointment!
โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้
ผู้จัดหา
หมายเหตุ: ลงทะเบียนฟรีหรือเข้าสู่ระบบ, เพื่อเข้าถึงข้อมูลทั้งหมด
ออนไลน์ล่าสุด: วันนี้
ลงทะเบียนตั้งแต่: 2026
16 ประกาศออนไลน์
ส่งคำขอ
โทรศัพท์ & แฟกซ์
+49 2556 ... โฆษณา
โฆษณาเหล่านี้อาจน่าสนใจสำหรับคุณด้วยเช่นกัน
สำเร็จ
ข้อความของคุณถูกส่งแล้ว
โฆษณาขนาดเล็ก
Hergensweiler
8,811 km
แผ่นเสียงเชื่อม, แผ่นเสียง,
ProtecW 5000
ProtecW 5000
สำเร็จ
ข้อความของคุณถูกส่งแล้ว
โฆษณาขนาดเล็ก
Balaguer
9,665 km
ตะหลิวเชื่อมปรับแนวได้เอง 100t
OerlikonLP100
OerlikonLP100
สำเร็จ
ข้อความของคุณถูกส่งแล้ว
โฆษณาขนาดเล็ก
Hergensweiler
8,811 km
โต๊ะหมุนงานเชื่อม, โต๊ะหมุน
Protec 10 ToKT 10 000
Protec 10 ToKT 10 000
สำเร็จ
ข้อความของคุณถูกส่งแล้ว
โฆษณาขนาดเล็ก
Kirchheim unter Teck
8,811 km
เครื่องเจียรทรงกระบอก - ภายนอก
KELLENBERGERR175-1500
KELLENBERGERR175-1500
สำเร็จ
ข้อความของคุณถูกส่งแล้ว
โฆษณาขนาดเล็ก
Écouflant
9,559 km
เครื่องดัดท่อ CNC
DAVIMCP18
DAVIMCP18
สำเร็จ
ข้อความของคุณถูกส่งแล้ว
โฆษณาขนาดเล็ก
เยอรมนี
8,550 km
เครื่องดัดโลหะแผ่นสี่ม้วน
IMCAR4RH 17/5
IMCAR4RH 17/5
สำเร็จ
ข้อความของคุณถูกส่งแล้ว
โฆษณาขนาดเล็ก
Ringaudai
7,762 km
ชุดเชื่อม
FRONIUSPLASMA WELDING
FRONIUSPLASMA WELDING
สำเร็จ
ข้อความของคุณถูกส่งแล้ว
โฆษณาขนาดเล็ก
Dortmund
8,878 km
เครื่องกัดเครื่องมือสากล CNC
AVIAFNE 50 N / TNC 410
AVIAFNE 50 N / TNC 410
สำเร็จ
ข้อความของคุณถูกส่งแล้ว
โฆษณาขนาดเล็ก
Wien
8,315 km
เครื่องดัดเหล็กแผ่น - 4 ลูกกลิ้ง
AKBENDAHS 30/08
AKBENDAHS 30/08
สำเร็จ
ข้อความของคุณถูกส่งแล้ว
โฆษณาขนาดเล็ก
Ditzingen
8,839 km
เครื่องตัดท่อ
Orbitalum
Orbitalum
ประกาศของคุณถูกลบเรียบร้อยแล้ว
เกิดข้อผิดพลาด

























































































































