ศูนย์เครื่องจักรกล

DAHLIH MCV-860

Stock machine "NEW" - available at short notice! (subject to prior sale)

Control: Fanuc 0i-MF Plus, 10.4"
Dedpfoifn N Nsx Afdjcn
with Manual Guide i & 2 MB NC memory
LOOK-AHEAD function, 400 blocks

Machine table:
Table size: 950 x 550 mm
Load capacity: 800 kg
Width of T-slots: 18 mm
Number of T-slots: 3
Distance between the T-slots: 150 mm

Travel ranges:
Travel X/Y/Z: 860/550/550 mm
Spindle nose to table surface: 150 - 700 mm

Linear guides & speeds:
Ball guides in X/Y axis
Roller guides in Z-axis
Rapid traverse X/Y/Z: 40/40/30 m/min
Feed rate for milling: 0 - 10,000 mm/min
Smallest increment: 0.001 mm

Tool magazine (CAM type) / changer:
Number of magazine positions: 24 (optional 30, 40)
System: chaotic
Max. Tool diameter: Ø 75 mm
Max. Max. tool diameter with free neighboring spaces: Ø150 mm (40 tools: Ø130 mm)
Max. Wkz. length: 300 mm
Max. Tool weight: 7 kg

Spindle:
Spindle taper: BBT-40 Big Plus® (optional DIN 69871 SK-40, SK-40 Big Plus®)
Drive power (30min/cont.): 18.5/ 11 kW
15,000 rpm direct spindle drive
Spindle oil cooler

Coolant, chip and compressed air management:
Coolant system incl. 300 liter tank and pumps
External coolant around the spindle
Chip spirals on the right and left in the machine bed
Compressed air nozzle on the spindle (M32/M33)
Compressed air through the spindle (M38/M39)
Compressed air and coolant gun

Miscellaneous:
Swivel control panel
Electronic handwheel (wired)
Central lubrication oil / air
Full enclosure
Working light
Heat exchanger on control cabinet
Auto-Power OFF function
Hand tool set
Signal light
Transformer 400 VAC, 50 Hz
CE declaration of conformity in accordance with European directives

Electrical and pneumatic requirements:
Electrical connection: 36 kVA
required. Pneumatic input pressure: 6 bar

Dimensions:
Machine size: B2,260 x D2,900 x H2,775 mm
Required floor space: W3,160 x D3,000 x H3,000 mm
(incl. chip conveyor ejection to the left)
Machine weight: approx. 5,400 kg (net)

Available special equipment:

Spindle:
- Direct drive spindle SK-40, 15,000 min-1
- Drive power (30min/cont.): 18.5 / 15 kW, (FANUC motor)

Tool magazine / changer:
- Tool drum magazine with 30 pockets, DIN69871, SK-40

Rotary or additional axes:
- Preparation for 4th axis (FANUC controls),
incl. cabling and Harting plug without axis driver

Coolant, chip and compressed air management:
- Bed flushing
- IKZ cooling lubricant pump with 20 bar pressure, for directly driven spindles
spindles
- incl. cartridge filter
- Belt chip conveyor incl. chip cart (chip conveyor at the front
to the left side of the machine)

Air extraction:
- Extraction system AR Filter ARNO 2VF "Plus" series w. EPA filter, - motor protection switch, filter status indicator
Motor protection switch, filter status indicator
Accessory kit for AR filter with Ø150 mm connection

Measuring and monitoring systems:
- BLUM TC50 touch probe with infrared transmission system for
workpiece measurement, incl. probe holder, repeat accuracy:
1μm
- Blum Z-Nano tool length measurement and
Tool breakage monitoring in the machine, incl. holder

- Auto-Door
- Pneumatic interface workpiece clamping
available immediately.

โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้