EMCO VMC 300

EMCO VMC 300

This EMCO VMC 300 Vertical Machining Center was manufactured in the year 2003 in Austria. It is equipped with a Siemens SINUMERIK 810D control unit. The machine features a 12-position automatic tool changer, an SK40 spindle with speeds up to 5,000 rpm, and travels of 420 × 330 × 240 mm (X/Y/Z), making it suitable for precise milling, drilling, and tapping operations. For more information, contact us.

• 2x units available (one newer and one older) with different Control Brands
• Distance from Spindle Nose to Table: 210 – 450 mm
• Number of T-Slots: 3
• T-Slot Width: 14 mm
• T-Slot Spacing: 100 mm
• Spindle Bearing Diameter: Ø60 mm
• Bearing Type: Angular Contact Ball Bearing
• Tool Taper: SK40 (DIN 69871 / ISO 7388-I)
• Pull Stud: M16 (DIN 69872 / ISO 7388-II)
• Automatic Tool Clamping
• Tool Clamping Force: 6,000 N
• Spindle Overhang: 330 mm
• Spindle Motor Power: 9 / 11 kW (100% / 60% Duty Cycle)
• Optional Spindle Speed: 0 – 8,000 rpm
• Maximum Torque: 100 Nm (5,000 rpm) / 78 Nm (8,000 rpm Option)
• Noise Level: 72 dB(A) at 5,000 rpm
• Milling Capacity in Steel (16MnCr5 – 790 N/mm²): 220 cm³/min
• Maximum Drilling Capacity in Steel: Ø25 mm
• Maximum Tapping Capacity in Steel: M20
• AC Servo Drives with Ball Screw Spindles
• Feed Rate (X/Y/Z): 0.01 – 12,000 mm/min
• Rapid Traverse (X/Y/Z): 12 m/min
• Feed Force X/Y: 6,000 N
• Feed Force Z: 8,800 N
• Resolution: 0.001 mm
• Tool Carrier: Drum Type with Direction Logic
• Automatic Tool Changer
• Maximum Total Tool Weight in Magazine: 36 kg
• Maximum Tool Diameter: 100 mm
• Maximum Tool Length: 220 mm
• Tool Change Time: T1: 5.8 s / T2: 3.9 s / T3: 3.9 s
• Chip-to-Chip Time (VDI 2852): T1: 8.9 s / T2: 7.0 s / T3: 7.0 s
• Coolant Tank Capacity: 100 L
• Coolant Pump Flow Rate: 10 L/min
• Maximum Coolant Pressure: 3.7 bar
• Coolant Supply: 4 External Nozzles
• Automatic Central Lubrication for Guideways and Ball Screw Spindles
• Grease Lubricated Main Spindle Bearings
• Power Supply: 3/PE ~ 400 V / 50–60 Hz
• Maximum Voltage Fluctuation: +5% / -10%
• Connected Load: 15 kVA
• Rated Current: 22 A
• Maximum Current: 25 A
• Main Fuse: 35 A (Slow-Blow)
• Required Short-Circuit Power: 1600 kVA
• Pneumatic System Pressure: 5 – 10 bar
• Minimum Air Flow: 750 L/min
• Average Air Consumption: 180 L/min
Additional Equipment

• Automatic 12-Position Tool Changer
• Automatic Central Lubrication System
• Coolant System with 4 External Nozzles
• Automatic Tool Clamping System
Chedpfx Aeya Hg Njizsa
• SK40 Spindle Interface
Machine Benefit:

• Reliable 12-Station Automatic Tool Changer
• Integrated Automatic Lubrication System for Guideways and Ball Screw Spindles

Dimensions
Machine Depth 2300 mm

Technical Specification
Taper Size SK 40