รถพ่วงพร้อมแท่นทำงาน

ES-GE Tandemanhänger - Rungen - CV

You can find our complete vehicle stock with immediately and short-term available vehicles on our website.

Excerpt from the equipment. Complete specification available on request.

Chassis:
* Steel welded construction with welded longitudinal beams and penetrated Z-crossmembers; close crossmember spacing for high floor load capacity

Ramp storage:
* Two insertion pockets for one loading ramp each, located between the longitudinal beams behind the axle assembly below the loading platform, with locking plate in the rear headframe

Godpfoy Rwycex Ai Hjub
Underrun protection:
* According to EU regulations

Front landing legs:
* Landing legs with single-side operation

Rear supports:
* Two adjustable drop supports

Axles:
* 2 x 10 t air suspension axle assemblies, SAF brand, drum brakes approx. 300 x 200 mm, center-mounted for twin tires, ABS, total air suspension travel approx. 200 mm (raise 140 mm, lower 60 mm), controlled via hand lever with detent function

Tyres:
* 8 units, 235/75 R17.5 – brand at our discretion
* Mounted on 6.75x17.5 rims with offset

Splash guards:
* PVC splash guards in front of and behind axles as per EU regulations

Load securing:
* Lashing ring holes in the outer frame every approx. 150 mm for tie-down straps, pull strength approx. 2.5 t
* 6 pairs of foldable lashing rings, evenly distributed, pull strength approx. 8 t
* Stake pockets for 80/50 removable stakes: 3 pairs of stake pockets in the outer frame, evenly distributed

Brake system:
* Compressed air brake system according to EU regulations with EBS
* Two coils for connection to truck, with red/yellow coupling heads
* Spring-loaded parking brake acting on one axle

Floor:
* Approx. 28 mm Z-hardwood floor recessed in the outer frame

Lighting system:
* Lighting system according to EU regulations, 24 Volt, multi-chamber rear lights, license plate lights, side marker lights, and lane guidance lights at the rear, connection plate left on drawbar, incl. connecting cable with 15-pin and 2 x 7-pin plugs

Accessories:
* 2 wheel chocks with bracket
* Detachable beacon at the rear
* Delivery includes 40 mm towing device (GVW max. 13,500 kg)

Paintwork:
* Chassis shot-blasted, cleaned, and hot-dip galvanized to the latest technical standards. Superstructure parts cleaned, primed, and hot-dip galvanized
* Chassis: Hot-dip galvanized + RAL 3002 carmine red
* Hubs: KTL black
* Underrun protection: RAL 9010 pure white
* Rims: RAL 9006 silver
* Attachments: galvanized / KTL black

Contour marking:
* According to EU regulations, yellow on sides and rear (with ES-GE logo)

Including special equipment:
* Rear extension approx. 800 mm incl. underrun protection, extendable loading platform, load capacity approx. 2 t, locking every approx. 200 mm
* Mechanically adjustable drawbar in length, 6 x approx. 100 mm, with bolted towing eye approx. 50 mm according to DIN 74053
* 4 rows of transverse stake pockets across the loading area, evenly distributed
* 12 galvanized tubular removable stakes, approx. 80/50/4 mm, approx. 1,000 mm long
* Container locks for 1x20’, extendable to approx. 2,820 mm, according to ISO 1496, EN 284 or EN 452
* 1 pair of aluminum ramps, load capacity per pair approx. 9,000 kg
* 4 stainless steel toolboxes between or behind the axles

โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้