Eumach UMC-1600

Eumach UMC-1600

This 5-axis EUMACH UMC-1600 was manufactured in 2020. It features an impressive X-axis travel of 1,620 mm, Y-axis travel of 1,260 mm, and Z-axis travel of 1,050 mm. The machine includes a robust table diameter of 1,320 mm and a maximum table load of 4,000 kg. If you are looking to get high-quality machining capabilities, consider the EUMACH UMC-1600 vertical machining centre we have for sale. Contact us for further details.

• CE certification: YesTravels and feeds
• B-axis swivel range: +10° to −190°
• C-axis rotation: 360°
• Rapid traverse X/Y/Z: 24 / 24 / 24 m/min
• Cutting feed X/Y/Z: 20 / 20 / 20 m/minRotary table (C-axis)
• Table diameter: Ø1,320 mm
• Max table speed: 30 rpm
• Minimum indexing increment: 0.001°
• Drive: Direct-drive torque motor
• T-slots: 13 slots, size 18H, pitch 100 mm
• Table height from floor: 1,085 mmSwivel head (B-axis)
• Drive: Direct-drive torque motor
• Swivel time vertical ↔ horizontal: 3 s
• Swivel range: +10° / −190°Spindle
• Power S1/S6: 37.4 / 54 kW
• Torque S1/S6: 170 / 390 Nm
• Front spindle bearing diameter: 100 mm
• Spindle centre to column: 1,105 mm
• Spindle taper: Pending confirmation (documentation lists HSK-A100, BT, CAT, SK50 as possible)Working distances
• Vertical spindle nose to table surface: 150–1,200 mm
• Horizontal spindle centre to table surface: 100–1,150 mm
• Vertical spindle nose to table centre: −300 to 960 mm
• Horizontal spindle centre to table centre: −250 to 1,010 mmAutomatic tool changer
• Type: Cam-arm
• Max tool diameter: Ø150 mm
• Max tool length: 350 mm
• Tool exchange position: HorizontalGuideways and ball screws
• Linear guide size X/Y/Z: 55 / 55 / 55 mm
• Number of guide rails X/Y/Z: 4 / 2 / 2
• Number of guide blocks X/Y/Z: 8 / 4 / 6
• Ball screw diameter X/Y/Z: Ø55 / Ø55 / Ø63 mm
• Ball screw pitch X/Y/Z: 16 / 12 / 12 mmElectrical data
• Voltage: 400 V
• Frequency: 50/60 Hz
• Connected load: 80 kVAOutline drawing confirms installation dimensionsIntegrated features/options
• Simultaneous 5-axis machining
• Direct-drive B-axis swivel head
• Direct-drive C-axis rotary table
• HEIDENHAIN iTNC 530 HSCI control with RS-232 interface
• Linear scales on X, Y, Z axes
• Rotary encoders on B and C axesPending confirmation (machine info)
• Exact spindle taper
• Operating hours
• Spindle hours
• Confirmation that the 60-tool magazine and all listed equipment are installed on this specific machine

Additional equipment

• Chain-type chip conveyor
• Two screw-type chip augers
• Full splash guard with roof (enclosure)
• Programmable coolant system
• Spindle air blast
• Spindle water cooler (chiller)
• Work light
• Machine status light
• Machine and control manuals
Ledsznl E Ejpfx Akajad
• Toolbox
• Approx. 40 HSK-100 tool holders included with the machine.Pending confirmation (accessories)
• Coolant through spindle (CTS)
• Touch probe (workpiece probing)
• Tool measurement system (tool setter)
• Complete list of included tool holders and accessories