เครื่องเชื่อมตาข่ายGensch
GSA 2200
เครื่องเชื่อมตาข่าย
Gensch
GSA 2200
VB ยังไม่รวมภาษีมูลค่าเพิ่ม
€10,000
ปีที่ผลิต
1989
สภาพ
ใช้แล้ว
(ทำงานได้เต็มประสิทธิภาพ)
ที่ตั้ง
Lobbach 

ข้อมูลเกี่ยวกับเครื่องจักร
- ชื่อเครื่องจักร:
- เครื่องเชื่อมตาข่าย
- ผู้ผลิต:
- Gensch
- รุ่น:
- GSA 2200
- ปีที่ผลิต:
- 1989
- สภาพ:
- สภาพดี (มือสอง)
- ประสิทธิภาพการทำงาน:
- ทำงานได้เต็มประสิทธิภาพ
ราคาและสถานที่
VB ยังไม่รวมภาษีมูลค่าเพิ่ม
€10,000
- ที่ตั้ง:
- Lobbach, เยอรมนี

โทร
รายละเอียดทางเทคนิค
- ความกว้างในการทำงาน:
- 500 มม
- เส้นผ่านศูนย์กลางลวด (สูงสุด):
- 4.5 มม
รายละเอียดข้อเสนอ
- รหัสประกาศ:
- A22156717
- อัปเดต:
- อัปเดตล่าสุดเมื่อ 19.06.2569
คำอธิบาย
We are offering this used Gensch GSA 2200 wire mesh welding machine, manufactured in 1989, in good condition.
Bsdszfgqqepfx Akmjli
The mesh welding machine can process wire thicknesses from 3 to 5 mm.
Operating principle:
The longitudinal wires, up to 6 pieces, are drawn from coils that unwind from spools into the welding portal. The transverse bars then fall from the magazine into the welding portal; the spacing of the transverse bars can be adjusted freely. The welding presses close, and the longitudinal and transverse wires are welded together.
After the welding process, the CNC-controlled carriage advances the mesh mat step by step. At the end, the mat is cut, and any wire overhang is trimmed.
Finally, the mat is stacked.
The current working width is 50 cm. The length of the mesh can be freely selected from 20 cm to 200 cm.
If you have any questions or need more information, please send us a message or call us.
โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้
Bsdszfgqqepfx Akmjli
The mesh welding machine can process wire thicknesses from 3 to 5 mm.
Operating principle:
The longitudinal wires, up to 6 pieces, are drawn from coils that unwind from spools into the welding portal. The transverse bars then fall from the magazine into the welding portal; the spacing of the transverse bars can be adjusted freely. The welding presses close, and the longitudinal and transverse wires are welded together.
After the welding process, the CNC-controlled carriage advances the mesh mat step by step. At the end, the mat is cut, and any wire overhang is trimmed.
Finally, the mat is stacked.
The current working width is 50 cm. The length of the mesh can be freely selected from 20 cm to 200 cm.
If you have any questions or need more information, please send us a message or call us.
โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้
ผู้จัดหา
หมายเหตุ: ลงทะเบียนฟรีหรือเข้าสู่ระบบ, เพื่อเข้าถึงข้อมูลทั้งหมด
ลงทะเบียนตั้งแต่: 2025
1 โฆษณาออนไลน์
ส่งคำขอ
โทรศัพท์ & แฟกซ์
+49 6226 ... โฆษณา
โฆษณาเหล่านี้อาจน่าสนใจสำหรับคุณด้วยเช่นกัน
โฆษณาขนาดเล็ก
Kortrijk
9,188 km
เครื่องเชื่อมตาข่าย
SchlatterMG950
SchlatterMG950
โฆษณาขนาดเล็ก
Đakovo
8,196 km
เครื่องเชื่อมตาข่าย
PRATTOSW PE 3000-61
PRATTOSW PE 3000-61
ประกาศของคุณถูกลบเรียบร้อยแล้ว
เกิดข้อผิดพลาด






























