เครื่องกลึง CNC พร้อมแม็กกาซีนแท่งขนาด 3 เมตร

Gildemeister MF Sprint 65

For Sale: Gildemeister MF Sprint 65 CNC Sliding Headstock Lathe with 3-Meter Bar Feeder, as shown in the pictures.
The machine was removed from our workshop in fully functional condition.
A video of the machine in operation prior to disassembly is available upon request.

Approximately five years ago, the linear guides of the X1 and Z1 slides (on the main spindle side) were replaced, including bearings and belts.
A new HMI interface was installed recently.

Detailed specifications and technical data can be found in the attached PDF.

TECHNICAL DATA
Control: Sinumerik 840C
Bar Feeder: SIMAG 65.1-3200G, Year of Manufacture: 1998
Bar Length: 3 meters
Bar Diameter / Spindle Bore: 65 mm

Main Drive
Power Output: 28 / 21 kW
Speed Range: 25 – 4,500 rpm
Torque: 320 / 240 Nm
Maximum Feed Rate for Thread Cutting: 10 m/min
C-Axis Speed: 120 rpm
C-Axis Torque (Holding Torque): 180 Nm

Tool Carrier
Number of Tool Stations: 8
Shank Diameter (DIN 69880): 30 mm
Number of Driven Tool Stations: 4
Power Output: 7.6 / 4.6 kW
Torque: 24 / 14.7 Nm
Maximum Speed of Tool Carrier 1: 4,000 rpm
Maximum Speed of Tool Carrier 2: 4,000 rpm

Slide 1
Cross Travel / Longitudinal Travel: 155 / 280 mm
Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min
Feed Force X/Z: 900 / 900 daN

Slide 2
Cross Travel / Longitudinal Travel: 82 / 120 mm
Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min
Feed Force X/Z: 900 / 900 daN

MACHINE DATA
Dimensions with Bar Feeder and Chip Conveyor (L × W × H): approx. 6 × 2 × 2 meters
Dsdewym Nfspfx Ah Neur
Weight: approx. 6.5 tons
Operating Voltage: 50 Hz, 400 V

Accessories:
Cooling System
Chip Conveyor
Documentation

The offer is subject to change and non-binding, changes and errors in the technical data or the equipment, as well as prior sale reserved
Used machines are purchased as seen, without warranty claims.
Delivery ex works excluding packaging and insurance, unless otherwise agreed.
The price does not include statutory value added tax.
As is usual with used machines, payment is made before loading.