เครื่องอัดเม็ดGránit-Mill
เครื่องอัดเม็ด
Gránit-Mill
ราคาคงที่ ยังไม่รวมภาษีมูลค่าเพิ่ม
€29,900
สภาพ
ใช้แล้ว
ที่ตั้ง
Cegléd 

รูปภาพแสดงให้เห็น
แสดงแผนที่
ข้อมูลเกี่ยวกับเครื่องจักร
ราคาและสถานที่
ราคาคงที่ ยังไม่รวมภาษีมูลค่าเพิ่ม
€29,900
- ที่ตั้ง:
- Cegléd, 2700 Magyarország
โทร
การขายเครื่องจักร

พบเครื่องจักรใหม่แล้วหรือยัง? เปลี่ยนของเก่าเป็นเงินสดตอนนี้เลย
รับราคาที่ดีที่สุดผ่าน Machineseeker
ข้อมูลเพิ่มเติมเกี่ยวกับการขายเครื่องจักร
ข้อมูลเพิ่มเติมเกี่ยวกับการขายเครื่องจักร
รายละเอียดข้อเสนอ
- รหัสประกาศ:
- A13597264
- อัปเดต:
- อัปเดตล่าสุดเมื่อ 13.06.2567
คำอธิบาย
We offer for sale the following Gránit-Mill 90 wood pelletizing presses, in the condition shown in the pictures, after the pelletizing plant has ceased operation.
The machine is made in Hungary, our company has an excellent relationship with the manufacturer, and we can help you purchase parts.
Drive and sticker handling is similar to the old CPM machines.
The presses (with pine) are capable of 1.2-1.5 t/h/pc.
Price:
€29 900/press
€49 900/ 2 presses
Included in the price:
pre-tank
control cabinet
dosing screw
permanent magnet
conditioner
press
motors
pre-tank 1.1 kW
feeder 1.5 kW
conditioner 15 kW
tablecloth 0.55 kW
main engine 90 kW
3 stickers
all three are made by La Meccanica
barely used
It has a 6 x 45 mm hole for pine
2 sets (total of 4) notched collars
spare parts
Crjdpfx Ajp T Twuogloh
screws
nuts
breaker pin
assembly aids
Status:
Engines and drives intact.
Both machines tested. It is recommended to replace the neck bearing of the right machine.
Smaller parts (such as the pellet cutter) must be replaced.
There is no water supply, the place is prepared.
The greasing method is manual, but central greasing can be easily installed.
Summary:
The machine on the left can be put into production immediately.
It requires a minor service on the right side.
If necessary, the machine can be tested at a pre-arranged time. Not in production, must be prepared. It is possible to check the mechanical durability and volume density of the produced pellets on site!
The machine is made in Hungary, our company has an excellent relationship with the manufacturer, and we can help you purchase parts.
Drive and sticker handling is similar to the old CPM machines.
The presses (with pine) are capable of 1.2-1.5 t/h/pc.
Price:
€29 900/press
€49 900/ 2 presses
Included in the price:
pre-tank
control cabinet
dosing screw
permanent magnet
conditioner
press
motors
pre-tank 1.1 kW
feeder 1.5 kW
conditioner 15 kW
tablecloth 0.55 kW
main engine 90 kW
3 stickers
all three are made by La Meccanica
barely used
It has a 6 x 45 mm hole for pine
2 sets (total of 4) notched collars
spare parts
Crjdpfx Ajp T Twuogloh
screws
nuts
breaker pin
assembly aids
Status:
Engines and drives intact.
Both machines tested. It is recommended to replace the neck bearing of the right machine.
Smaller parts (such as the pellet cutter) must be replaced.
There is no water supply, the place is prepared.
The greasing method is manual, but central greasing can be easily installed.
Summary:
The machine on the left can be put into production immediately.
It requires a minor service on the right side.
If necessary, the machine can be tested at a pre-arranged time. Not in production, must be prepared. It is possible to check the mechanical durability and volume density of the produced pellets on site!
ผู้จัดหา
หมายเหตุ: ลงทะเบียนฟรีหรือเข้าสู่ระบบ, เพื่อเข้าถึงข้อมูลทั้งหมด
ลงทะเบียนตั้งแต่: 2023
ส่งคำขอ
โทรศัพท์ & แฟกซ์
+36 30 35... โฆษณา
ประกาศของคุณถูกลบเรียบร้อยแล้ว
เกิดข้อผิดพลาด