ศูนย์เครื่องจักรกลแนวตั้ง

haas dt1

Here is the complete reference sheet combining the Haas DT-1 machine specifications, probing package, and 5-axis setup in metric units.
2016.
Located in Israel
Transport cost to Erope 8000 Euro
under power

Machine Travels & Work Envelope
X-Axis Travel: 508 mm



Y-Axis Travel: 406 mm

Z-Axis Travel: 394 mm

Spindle Nose to Table Top: 152 mm – 546 mm

Worktable
Table Size (L x W): 660 mm x 381 mm

Max Weight on Table: 113.4 kg

T-Slot Width: 15.9 mm – 16.0 mm

T-Slot Center Distance: 125 mm (3 standard slots)

Spindle Specs
Spindle Taper: BT30

Max Speed: 10,000 RPM
ATC 20+1
5-Axis Setup (TRT100 Dual-Axis Rotary Table)
Rotary Unit: TRT100 dual-axis tilting trunnion (mounted on the table).

Platter Diameter: 100 mm

Max Part Swing: 213 mm

Weight Capacity on Platter: 6.8 kg (3+2 positioning) / 2.3 kg (simultaneous 5-axis)

Travel: A-axis (Tilt) ±120°, C-axis (Rotation) 360° continuous

Indexing Speeds: 1,000 deg/sec on both axes

Control Requirements: 4th & 5th-axis drive options installed on the machine control.

Key Software Features:

Supports 3+2 indexing and continuous 5-axis simultaneous machining.

DWO/TCPC (Dynamic Work Offsets / Tool Center Point Control): Manages work offsets automatically as part angles tilt/rotate, eliminating the need to re-post programs when mounting locations change.

Working Clearance: The TRT100 unit consumes ~230 mm of vertical space, leaving a tight Z-axis machining clearance window (~160 mm) inside the machine's 394 mm total Z-travel.

Probing & Tool Measurement (WIPS-R / Renishaw)
Hardware Package:

Workpiece Spindle Probe: Renishaw OMP40-2 (BT30 optical touch probe)

Tool Setter Probe: Renishaw OTS (Table-mounted optical tool setter)

Receiver: Renishaw OMI-2T (Modulated optical transmission)

Njdpfx Ajzwxz Esftowk
Tool Setter Functions: Automatic tool length offset setting, rotating tool diameter offset calibration, and in-cycle tool breakage detection.

Workpiece Probe Functions: Work Coordinate System (G54–G59) setting, feature inspection (bores/bosses/surfaces), and part alignment skew angle calculation.