ศูนย์เครื่องจักรกลแนวตั้งHAAS
VF-2SS
ศูนย์เครื่องจักรกลแนวตั้ง
HAAS
VF-2SS
ปีที่ผลิต
2013
สภาพ
ใช้แล้ว
(ไม่สามารถใช้งานได้)
ที่ตั้ง
Mecklenburg-Vorpommern 

ติดตามการประมูล
ข้อมูลเกี่ยวกับเครื่องจักร
- ชื่อเครื่องจักร:
- ศูนย์เครื่องจักรกลแนวตั้ง
- ผู้ผลิต:
- HAAS
- รุ่น:
- VF-2SS
- หมายเลขเครื่องจักร:
- 1106086
- ปีที่ผลิต:
- 2013
- สภาพ:
- ต้องการซ่อมแซม (มือสอง)
- ประสิทธิภาพการทำงาน:
- ไม่สามารถใช้งานได้
รายละเอียดทางเทคนิค
- ระยะเคลื่อนที่แกน X:
- 762 มม
- ระยะเคลื่อนที่แกน Y:
- 406 มม
- ระยะเคลื่อนที่ตามแกน Z:
- 508 มม
- ความกว้างของโต๊ะ:
- 356 มม
- ความยาวโต๊ะ:
- 914 มม
การจัดหา
- ที่ตั้ง:
- Mecklenburg-Vorpommern, เยอรมนี
– ระยะทาง: ประมาณ 8,509 กม.
- ความพร้อมใช้งาน:
- ทันทีหลังจากการประมูลสิ้นสุด
- เงื่อนไขการจัดส่ง:
- EXW
ค่าใช้จ่ายในการถอดประกอบและขนถ่ายสินค้า:
รับสินค้าที่สถานที่:
ฟรี
ฟรี
ค่าขนส่ง:
คำอธิบาย
The machine's tool changer is defective. The repair costs for this are approximately €8,000 - €10,000. The axis wear corresponds to the typical wear for a machine of this year of manufacture.
TECHNICAL DETAILS
Travel Paths
X-axis travel: 762 mm
Y-axis travel: 406 mm
Z-axis travel: 508 mm
Table
Length: 914 mm
Width: 356 mm
Max. table load: 680 kg
Spindle
Spindle taper: SK-40
Spindle drive: 22.4 kW
Speed: 12,000 rpm
Tool Changer
Tool changer: 24+1 magazine positions
Feed Rates
Rapid traverse: 35.6 m/min
MACHINE DETAILS
Electrical Data
Voltage: 360–480 V
Phases: 3
Frequency: 50/60 Hz
Full load current: 40 A
Maximum load: 70 A
Short-circuit interrupting capacity: 10,000 A
Short-circuit current: 5,000 A RMS symmetric
Iiodpfx Ajw Axkyshueh
Operating Dimensions
Max. operating height: 2,667 mm
Max. operating width: 3,175 mm
Max. operating depth: 2,769 mm
EQUIPMENT
Key switch for program lock
Synchronized thread tapping
208-liter coolant system with continuous coolant supply
15" color LCD monitor with USB port
โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้
TECHNICAL DETAILS
Travel Paths
X-axis travel: 762 mm
Y-axis travel: 406 mm
Z-axis travel: 508 mm
Table
Length: 914 mm
Width: 356 mm
Max. table load: 680 kg
Spindle
Spindle taper: SK-40
Spindle drive: 22.4 kW
Speed: 12,000 rpm
Tool Changer
Tool changer: 24+1 magazine positions
Feed Rates
Rapid traverse: 35.6 m/min
MACHINE DETAILS
Electrical Data
Voltage: 360–480 V
Phases: 3
Frequency: 50/60 Hz
Full load current: 40 A
Maximum load: 70 A
Short-circuit interrupting capacity: 10,000 A
Short-circuit current: 5,000 A RMS symmetric
Iiodpfx Ajw Axkyshueh
Operating Dimensions
Max. operating height: 2,667 mm
Max. operating width: 3,175 mm
Max. operating depth: 2,769 mm
EQUIPMENT
Key switch for program lock
Synchronized thread tapping
208-liter coolant system with continuous coolant supply
15" color LCD monitor with USB port
โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้
การดำเนินการชำระเงิน
- ค่าใช้จ่ายเพิ่มเติมในการซื้อ:
- 18 %
- เงื่อนไขการชำระเงิน:
- ชำระเงินล่วงหน้า 100%
- วิธีการชำระเงิน:
การโอนเงินผ่านธนาคาร
รายละเอียดข้อเสนอ
- รหัสประกาศ:
- A19614996
- หมายเลขอ้างอิง:
- AUC-2507143
- อัปเดต:
- อัปเดตล่าสุดเมื่อ 01.08.2568
- ข้อเสนอพิเศษเฉพาะ:
- มีเฉพาะในงานประมูลเท่านั้น
การตรวจสอบ
สามารถเข้าชมได้
เครื่องจักรกำลังต่อไฟ
Machineseeker แนะนำโดยทั่วไปให้ตรวจสอบเครื่องจักรมือสอง
ข้อมูลทั้งหมดถูกให้ตามความรู้และความสุจริตใจอย่างดีที่สุด – โปรดตรวจสอบด้วยตนเองที่สถานที่จริง
โฆษณาเหล่านี้อาจน่าสนใจสำหรับคุณด้วยเช่นกัน
โฆษณาขนาดเล็ก

8,873 km
ศูนย์เครื่องจักรกลแนวตั้ง
HAASVF-2SS
HAASVF-2SS
โฆษณาขนาดเล็ก

8,646 km
ศูนย์ชิ้นแนวตั้ง
HAASVF-2SS
HAASVF-2SS
การประมูล
การประมูลสิ้นสุดแล้ว

8,928 km
ศูนย์เครื่องจักรกล
HAASVF-2SS
HAASVF-2SS
โฆษณาขนาดเล็ก

8,450 km
ศูนย์ชิ้นแนวตั้ง
HAASVF 2 SS YT
HAASVF 2 SS YT
โฆษณาขนาดเล็ก

8,128 km
ศูนย์เครื่องจักรกล
HAASVF-2SS
HAASVF-2SS
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
ประกาศของคุณถูกลบเรียบร้อยแล้ว
เกิดข้อผิดพลาด