เครื่องอัดขึ้นรูปสำหรับการผลิตชุดเล็ก

Hidrobrasil Doppelständerpresse

40T H-frame press with ram table, calibration press

• Press capacity: 6-40 T (adjustable)
• Maximum installation height: 700 mm
• Usable area of lower table: 1000x600 mm
• Usable area of ram: 1000x600 mm
• Frame type: H-frame
• Guide column diameter: Ø 100 mm (4 units at the corners)
• Table height from floor: 800 mm
• Overall dimensions approx. (WxDxH): 2,100x1,600x3,500 mm
• Total weight approx.: 3,500 kg
• T-slots and bores can be manufactured to customer specification.

Giodpfsxrby Hex Aa Nop
HYDRAULIC CYLINDER:
• Piston stroke: 0-500 mm (adjustable)
• Cylinder diameter: Ø 140 mm (1 unit)
• Piston rod diameter: Ø 80 mm (1 unit)
• Working pressure (max.): 260 bar
• Return speed: 90 mm/sec
• Ram speed: 9 mm/sec
• Idle speed: 80 mm/sec

HYDRAULIC POWER UNIT:
• Hydraulic pump (brand: ASC): 67+8 L/min (1 unit)
• Motor power: 4 kW (1 unit)
• Pressure accuracy during press stroke: +/- 5 bar
• The hydraulic unit is mounted on the upper rear side of the press.
• Hydraulic block and valves by DUPLOMATIC.
• A manometer is used to display the pressure.
• Air and oil filters are manufactured by FILTREC.
• An electronic oil level switch is used.
• Air cooling (heat exchanger) is used to cool the hydraulics.
• Pressure adjustable via pressure switch.
• Control via sensor.
• Protective cover (door) on the back of the press.
• Safety light sensors and interior lighting included.

ELECTRICAL CONNECTION:
• Main supply: 400V AC
• Control voltage: 24V DC
• Frequency: 50 Hz
• Hydraulic main motor connection: 4 kW
• Total connected load: approx. 6 kW

CONTROL CABINET EQUIPMENT:
• Protection class: IP 54
• Reserve space: 30%
• Cooling: Yes (air cooling)
• Interior lighting: Yes
• Operating mode selector switch: Yes (lockable)

• Electrical components by SIEMENS, ALLEN BRADLEY, SICK.

โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้