รถพ่วงดัมพ์สามทางHUMBAUR
HTK 3000.31 mit Stahlbortwände, E-Pumpe
รถพ่วงดัมพ์สามทาง
HUMBAUR
HTK 3000.31 mit Stahlbortwände, E-Pumpe
VB ยังไม่รวมภาษีมูลค่าเพิ่ม
€6,150
ปีที่ผลิต
2026
สภาพ
ใหม่
ที่ตั้ง
Nürnberg 

ข้อมูลพื้นฐาน
ราคาและสถานที่
VB ยังไม่รวมภาษีมูลค่าเพิ่ม
€6,150
- ที่ตั้ง:
- Hutbergstr. 27, 90475 Nürnberg, Deutschland

โทร
รายละเอียดทางเทคนิค
ขนาดและน้ำหนัก
น้ำหนักรวม:
3,000 กก.
น้ำหนักเปล่า:
940 กก.
น้ำหนักบรรทุกสูงสุด:
2,060 กก.
ความยาวทั้งหมด:
4,555 มม
ความกว้างทั้งหมด:
1,910 มม
ความสูงรวม:
1,260 มม
ความยาวพื้นที่บรรทุก:
3,130 มม
ความกว้างของพื้นที่บรรทุก:
1,740 มม
ความสูงพื้นที่บรรทุกสินค้า:
400 มม
เพลาและล้อ
การกำหนดค่าของเพลา:
2 เพลา
ขนาดยาง:
195/50 R13C
เบรก
เบรกพ่วง:
รถพ่วงมีเบรก
รายละเอียดข้อเสนอ
- รหัสประกาศ:
- A23368807
- อัปเดต:
- อัปเดตล่าสุดเมื่อ 22.11.2569
คำอธิบาย
Humbaur three-way tipper with electric pump and Furmann steel sideboards, hot-dip galvanized, 40 cm high, for demanding applications.
Description:
The HTK three-way tipper not only impresses with our usual high quality standards.
It is equipped with a practical hand pump, which you can also easily replace with an electric hydraulic pump if required. From a permissible total weight of 3,000 kilograms, the electric and hand pump are installed as standard in the trailer. This turns tilting your load into a breeze, rather than a challenge!
Technical data:
Trailer type - Two-axle
Construction type - Aluminum
Rear tipper - 45°
Three-way tipper - 45°
Weight - 940 kg
Total weight - 3,000 kg
Payload - 2,060 kg
Internal length - 3,140 mm
Overall length - 4,555 mm
Internal width - 1,750 mm
Overall width - 1,910 mm
Internal height - 400 mm
Overall height - 1,260 mm
Loading height - 745 mm
Tires - 13 inches
Standard equipment: V-drawbar, hot-dip galvanized
Chassis and tipping platform, hot-dip galvanized
Tipping platform made of steel, manufactured in one piece
Humbaur multi-function lighting
Sideboards, reinforced Furmann BW, galvanized
Rear flap, hinged
Tie-down rings mounted in the platform floor, tensile force 800 kg per tie-down ring
Support wheel
Knodpo Algdiofx Af Tjd
Plank shaft as preparation for aluminum planks for easy retrofitting
โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้
Description:
The HTK three-way tipper not only impresses with our usual high quality standards.
It is equipped with a practical hand pump, which you can also easily replace with an electric hydraulic pump if required. From a permissible total weight of 3,000 kilograms, the electric and hand pump are installed as standard in the trailer. This turns tilting your load into a breeze, rather than a challenge!
Technical data:
Trailer type - Two-axle
Construction type - Aluminum
Rear tipper - 45°
Three-way tipper - 45°
Weight - 940 kg
Total weight - 3,000 kg
Payload - 2,060 kg
Internal length - 3,140 mm
Overall length - 4,555 mm
Internal width - 1,750 mm
Overall width - 1,910 mm
Internal height - 400 mm
Overall height - 1,260 mm
Loading height - 745 mm
Tires - 13 inches
Standard equipment: V-drawbar, hot-dip galvanized
Chassis and tipping platform, hot-dip galvanized
Tipping platform made of steel, manufactured in one piece
Humbaur multi-function lighting
Sideboards, reinforced Furmann BW, galvanized
Rear flap, hinged
Tie-down rings mounted in the platform floor, tensile force 800 kg per tie-down ring
Support wheel
Knodpo Algdiofx Af Tjd
Plank shaft as preparation for aluminum planks for easy retrofitting
โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้
ผู้จัดหา
หมายเหตุ: ลงทะเบียนฟรีหรือเข้าสู่ระบบ, เพื่อเข้าถึงข้อมูลทั้งหมด
ลงทะเบียนตั้งแต่: 2011
42 ประกาศออนไลน์
ส่งคำขอ
โทรศัพท์ & แฟกซ์
+49 911 9... โฆษณา
ประกาศของคุณถูกลบเรียบร้อยแล้ว
เกิดข้อผิดพลาด


























