เครื่องบดเข็มขัดLöser
FS384/150-2
เครื่องบดเข็มขัด
Löser
FS384/150-2
สภาพ
ใช้แล้ว
ที่ตั้ง
Dietzenbach 

รูปภาพแสดงให้เห็น
แสดงแผนที่
ข้อมูลเกี่ยวกับเครื่องจักร
ราคาและสถานที่
- ที่ตั้ง:
- Siemensstrasse 13 A, 63128 Dietzenbach, Deutschland

โทร
รายละเอียดทางเทคนิค
- กำลัง:
- 5.5 กิโลวัตต์ (7.48 แรงม้า)
รายละเอียดข้อเสนอ
- รหัสประกาศ:
- A17680888
- อัปเดต:
- อัปเดตล่าสุดเมื่อ 12.11.2567
คำอธิบาย
The wet grinding machine with integrated stainless steel drip tray is used for professional processing of square tubes and flat profiles up to 150 mm wide and is suitable for grinding steel, stainless steel and non-ferrous metals.
The machine stand forms a machine unit together with the tool units and the control cabinet.
Key data of the machine:
Passage height (workpiece height): 100 mm
Maximum workpiece width: 150 mm
Sanding belt tension: Manual
Sanding belt dimensions: 2500 mm length x 150 mm width
Tool units
The two tool carriers are designed for the use of sanding belts 150 x 2500 mm. Each unit has a three-phase motor with direct drive. The drive power of each unit is 5.5 KW.
Workpiece transport
Hjdpfx Abju Nwt Eegsfd
The workpieces are transported via an endless belt.
The drive is a variable speed gearbox whose feed (belt speed) is adjustable via a handwheel.
Water tank
The machine is equipped with a water tank to be placed under the machine. The water is fed from the machine's stainless steel tank after the second station via a funnel into the sedimentation tank. A feed pump, which is located in the drainage basin, pumps the water back to the units.
โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้
The machine stand forms a machine unit together with the tool units and the control cabinet.
Key data of the machine:
Passage height (workpiece height): 100 mm
Maximum workpiece width: 150 mm
Sanding belt tension: Manual
Sanding belt dimensions: 2500 mm length x 150 mm width
Tool units
The two tool carriers are designed for the use of sanding belts 150 x 2500 mm. Each unit has a three-phase motor with direct drive. The drive power of each unit is 5.5 KW.
Workpiece transport
Hjdpfx Abju Nwt Eegsfd
The workpieces are transported via an endless belt.
The drive is a variable speed gearbox whose feed (belt speed) is adjustable via a handwheel.
Water tank
The machine is equipped with a water tank to be placed under the machine. The water is fed from the machine's stainless steel tank after the second station via a funnel into the sedimentation tank. A feed pump, which is located in the drainage basin, pumps the water back to the units.
โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้
ผู้จัดหา
หมายเหตุ: ลงทะเบียนฟรีหรือเข้าสู่ระบบ, เพื่อเข้าถึงข้อมูลทั้งหมด
ลงทะเบียนตั้งแต่: 2008
76 ประกาศออนไลน์
ส่งคำขอ
โทรศัพท์ & แฟกซ์
+49 6074 ... โฆษณา
โฆษณาเหล่านี้อาจน่าสนใจสำหรับคุณด้วยเช่นกัน
โฆษณาขนาดเล็ก
Rödermark
8,827 km
ระบบพ่นต่อเนื่อง-พ่นขอบโปรไฟล์
MUNK-SCHMITZStab.- + Profilkantenstrahlanlage
MUNK-SCHMITZStab.- + Profilkantenstrahlanlage
โฆษณาขนาดเล็ก
Peterslahr
8,903 km
สินค้าอันตราย
Sonstige/OtherTankwagen
Sonstige/OtherTankwagen
โฆษณาขนาดเล็ก
Voerde (Niederrhein)
8,932 km
กดตัวกรองห้อง
โฆษณาขนาดเล็ก
Eislingen/Fils
8,791 km
กดประหลาด - คอลัมน์เดียว
SCHULERPD 63-250
SCHULERPD 63-250
โฆษณาขนาดเล็ก
Deskle
8,555 km
หน่วยพ่นทราย
TOSCATS-500
TOSCATS-500
โฆษณาขนาดเล็ก
San Giovanni Al Natisone
8,572 km
เครื่องบาก / เครื่องตัด PIN
LöserAA220
LöserAA220
โฆษณาขนาดเล็ก
Kanzach
8,816 km
ไซด์โหลดเดอร์
KalmarDFQ50 14/40 D
KalmarDFQ50 14/40 D
โฆษณาขนาดเล็ก
Wildflecken
8,739 km
เครื่องบดโต๊ะหมุน
KEHRENRS 7C
KEHRENRS 7C
โฆษณาขนาดเล็ก
Dietzenbach
8,826 km
เครื่องเจียรท่อแบบไม่มีศูนย์กลาง
LöserRP-S 371
LöserRP-S 371
โฆษณาขนาดเล็ก
Fuldatal
8,744 km
เครื่องบดเข็มขัด
WIEGANDS- 150
WIEGANDS- 150
ประกาศของคุณถูกลบเรียบร้อยแล้ว
เกิดข้อผิดพลาด






































































