เครื่องเจียรกระจกLisec
WRA-1000
เครื่องเจียรกระจก
Lisec
WRA-1000
ปีที่ผลิต
2015
สภาพ
ใช้แล้ว
ที่ตั้ง
Sankt Valentin 

รูปภาพแสดงให้เห็น
แสดงแผนที่
ข้อมูลเกี่ยวกับเครื่องจักร
- ชื่อเครื่องจักร:
- เครื่องเจียรกระจก
- ผู้ผลิต:
- Lisec
- รุ่น:
- WRA-1000
- หมายเลขเครื่องจักร:
- 318-082691
- ปีที่ผลิต:
- 2015
- สภาพ:
- ปรับปรุงใหม่ทั้งหมด (มือสอง)
- ประสิทธิภาพการทำงาน:
- ทำงานได้เต็มประสิทธิภาพ
ราคาและสถานที่
- ที่ตั้ง:
- Gutenhofen 4, 4300 St.Valentin, Österreich

โทร
รายละเอียดข้อเสนอ
- รหัสประกาศ:
- A20920777
- อัปเดต:
- อัปเดตล่าสุดเมื่อ 13.01.2569
คำอธิบาย
150 l/min Water Throughput
1000 l Settlement Tank
Gsdox Trrljpfx Ahwsbg
System for cleaning wastewater from CNC machines.
The wastewater is conveyed from the CNC machines via lift pumps into the WRA-1000. Before entering the treatment unit, a flocculant is continuously and automatically dosed and thoroughly mixed with the wastewater using an integrated mixer.
The integrated lamella pack in the WRA-1000 allows for short reaction times during the settling of the flocculated contaminants. The sludge settles in the cone of the WRA-1000 and is automatically discharged at preset intervals into the sludge big-bag located beneath. Excess water is returned to the system via an integrated lift pump, which minimizes water loss.
The water purified by the WRA-1000 then flows into the collection tank of the CNC system. From this tank, the CNC machines can use their pumps and piping systems to reuse the treated process water for further machining operations.
โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้
1000 l Settlement Tank
Gsdox Trrljpfx Ahwsbg
System for cleaning wastewater from CNC machines.
The wastewater is conveyed from the CNC machines via lift pumps into the WRA-1000. Before entering the treatment unit, a flocculant is continuously and automatically dosed and thoroughly mixed with the wastewater using an integrated mixer.
The integrated lamella pack in the WRA-1000 allows for short reaction times during the settling of the flocculated contaminants. The sludge settles in the cone of the WRA-1000 and is automatically discharged at preset intervals into the sludge big-bag located beneath. Excess water is returned to the system via an integrated lift pump, which minimizes water loss.
The water purified by the WRA-1000 then flows into the collection tank of the CNC system. From this tank, the CNC machines can use their pumps and piping systems to reuse the treated process water for further machining operations.
โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้
ผู้จัดหา
หมายเหตุ: ลงทะเบียนฟรีหรือเข้าสู่ระบบ, เพื่อเข้าถึงข้อมูลทั้งหมด
ลงทะเบียนตั้งแต่: 2022
ส่งคำขอ
โทรศัพท์ & แฟกซ์
+43 676 3... โฆษณา
ประกาศของคุณถูกลบเรียบร้อยแล้ว
เกิดข้อผิดพลาด












