ชุดเชื่อม

Lorch MicorMIG 400 BasicPlus

Lorch - MIG-MAG Inverter, MicorMIG 400 BasicPlus - Water-cooled suitcase system with controls in removable full-protection wire feed case, intermediate hose package 1m
MicorMIG 400 BasicPlus - Water-cooled suitcase system

Contactless data transfer
The digital interface enables easy access to and management of your power source using Lorch NFC cards. Card management supports user permission control, allows reading and writing of jobs, and offers upgrade capabilities.

Crater fill at weld end
Gisdpfxex Tg Dvo Ahwel
The switchable end crater filling ensures that the welding current does not end abruptly but is intentionally reduced. This allows the weld pool to cool and automatically fills the end crater with material at lower energy input.

Arc dynamics control
With arc dynamics regulation, you can select your preferred arc characteristics. Depending on the control panel, a range of dynamic levels from "soft" to "hard" are available.

Infinitely adjustable welding inverter
Unlike transformer systems, the Lorch MicorMIG allows the current-voltage ratio to be continuously adjusted to meet the required welding parameters.

Versatility
The Lorch MicorMIG operates with both Argon-CO₂ mixed gas and 100% CO₂, making it suitable for international use.

Powermaster
The Lorch Powermaster torch allows you to set all key parameters, such as work points and arc dynamics, directly from the handle.

EN 1090 certified
With the Lorch MicorMIG, synergetic control and automatic settings make it possible to weld in conformity with EN 1090. When combined with the Lorch EN 1090 advantage package and parameter settings via NFC cards, you are prepared for all welding applications.

BasicPlus control concept:

- “3-step and weld” operating concept
- Stepless welding current adjustment
- Volt-ampere display
- Switchable end crater fill (adjustable via submenu)
- 7-level arc dynamics control
- With automatic setup (synergy function)
- Welding program selection in the wire feed compartment
- 2-/4-step, spot, or interval welding selection
- Fully upgradable

Technical data:

- MIG MAG welding range: 30–400 A
- Stepless inverter
- Weldable wires: 0.6 mm – 1.6 mm
- Duty cycle at 100%: 300 Amps
- Duty cycle at 30%: 370 Amps
- Duty cycle at max current: 45%
- Mains voltage: 3~400 V
- Dimensions (mm): 880 x 490 x 955
- Weight: 61 kg

โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้