เลื่อยวงเดือนอลูมิเนียมกึ่งอัตโนมัติ

Plantec BC 450 HA

Aluminum circular saw BC 450 HA, semi-automatic (MG FRONT-450)
The BC 450 HA is a double miter saw with a swivel range of 45° to the left and
22.5° to the right and an automatic mitre adjustment via stop functions. The saw stroke
runs automatically and the material is clamped pneumatically. The saw blade (450 x 30 mm) runs horizontally.
can also be optionally equipped with a digital mitre angle display, a scribing laser and pneumatics for lifting the protective hood!

Equipment
Double mitre machine with powerful drive motor
Two-button control for triggering the saw cut
(optionally also available as one-button control)
Large mitre range from -22.5° to +45°,
Swivel range 67.5° - 0° - 45°
Automatic miter adjustment, fixed stop functions
at -45° / 90° / +45° and two variable stop functions
adjustable to the desired angle!
Two horizontal pneumatic clamping cylinders
Clearly arranged control panel
Large protective hood covers the entire working area,
is lifted pneumatically
Adjustable blade and cutting feed
Connections for extraction system
Minimal lubrication system
Air gun for cleaning the machine
Saw blade ø 450 mm

Hodopa Nxaopfx Aftefr
Work sequence
1. setting the cutting angle 2. inserting the material 3. adjusting the stroke speed
4. bring the clamping cylinder to within 20 mm of the material 5. clamp the material 6. press the
The machine is ready for operation by pressing the start button. 7. press and hold the two SAW buttons, the material is sawn. 8.
8. at the end of the cycle, release both SAW buttons and press the STOP button 9.
9. open the clamping vice and remove or advance the material

Plantec Maschinen GmbH

โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้