เลื่อยวงเดือนอลูมิเนียมกึ่งอัตโนมัติ

Plantec UK 600 HA 90 GRAD

Aluminum circular saw UK 600 HA 90°, semi-automatic
The semi-automatic circular saw UK 600 HA 90° is an "upcut" machine and is mainly used for cutting
used for cutting profile materials made of cast aluminum, copper and hard plastics
(limited solid material). The machine is characterized by easy handling and quick and
quick and easy change of material. Only 90° cuts are possible with this machine!
The saw feed takes place automatically at the touch of a button, the material is clamped via
Hsdjpa Nxdjpfx Aftofr
two pneumatically controlled vertical and horizontal clamping cylinders. This machine comes with a minimum lubrication system and an air spray gun for cleaning the machine as standard! Connections for a chip extraction system are available on this machine. Furthermore, this machine can be optionally equipped with a digital mitre angle display, a scribing laser and pneumatics for lifting the protective hood!
be equipped!

Equipment
Large support table, powerful drive motor
Two-button control for triggering the saw cut
(optionally also available as one-button control)
Clearly arranged control panel
Two vertical and two horizontal pneumatic clamping cylinders
Hydropneumatic lifting of the saw blade, with oil level indicator
Fixed material feed jaw can be moved backwards to increase the cutting
cutting capacity can be moved to the rear
Large protective hood covers the entire working area
Minimum lubrication system with 2 liter reservoir
Adjustable blade and cutting feed
Air gun for cleaning the machine
Saw blade ø 600 mm

Work sequence
1. setting the cutting angle 2. inserting the material 3. adjusting the stroke speed
4. bring the clamping cylinder to within 20 mm of the material 5. clamp the material 6. press the
The machine is ready for operation by pressing the start button. 7. press and hold the two SAW buttons, the material is sawn. 8.
8. at the end of the cycle, release both SAW buttons and press the STOP button 9.
9. open the vice and remove or push the material forward

Technical data such as cutting range, power, etc. (see data sheet attached).

Plantec Maschinen GmbH

โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้