ศูนย์เครื่องจักรกลแนวตั้ง

Matsuura MAM72-25V PC 2

5-Axis Vertical Machining Center, used, year of manufacture 2007 / SN17224 / Control ON time: 66,963 hours

Control System
MATSUURA G-Tech 30i (FANUC 30i MA) for 5-axis simultaneous machining

Travel

X-axis travel: 550 mm
Y-axis travel: 410 mm
Z-axis travel: 450 mm
B-axis: +110° to -110°
C-axis: 360°

Max. workpiece size: Ø250 x height 250 mm
Max. table load: 40 kg

Table indexing B- and C-axes: 0.001°

Pallet size: Ø130 mm
Max. workpiece size: Ø250 x height 250 mm
Max. pallet capacity: 40 kg
Pallet interface: Capto C6

Spindle
Speed range (standard): 50 – 15,000 rpm
Spindle taper with face contact: BT 40 JIS B 6339 Big+
Spindle motor power with FANUC drive: 7.5/5.5 kW
Max. torque: 65.1 Nm up to 1,100 rpm

Rapid Traverse and Positioning Speeds
Rapids:
Rapid traverse X, Y, Z axes: 50,000 mm/min
B-axis: 30 rpm
C-axis: 50 rpm

Feeds:
X, Y, and Z axes: 1 - 50,000 mm/min
B-axis: 30 rpm
C-axis: 50 rpm

Tool Changer
Max. tool weight: 10 kg
Max. tool diameter (all stations filled): Ø96 mm
Max. tool diameter (with adjacent stations empty): Ø150 mm
Max. tool length: 300 mm

Guides
Axis guideways: Roller guides
Lubrication: Permanent grease lubrication
Ball screws
Ball screw diameter X, Y, and Z axes: Ø36 mm
Pitch: 16 mm

Axis Drives
Power X, Y, Z axis: 4.5/4.5/5.5 kW
Power B and C axis: 4.5/2.5 kW
Axial force X, Y, Z axis: kN

Space Requirements* (standard machine)
Machine height above floor: 2,705 mm
Width: 2,281 mm
Depth: 3,665 mm
*Dimensions may differ for this particular machine!

Machine Weight
Standard machine: 7,800 kg
Machine with PC-2: 8,600 kg

Connections
Total connected load:
Standard machine: 32 kVA
Machine with PC-2: kVA
Connection voltage: 3 x 400V, 50 Hz
Compressed air connection: 5.5 - 9.5 bar
5-axis simultaneous control


Expandability of tool magazine capacity from standard 30 to 40 tool positions
Cjdpfx Ajwwk Dzjglsrh

Pallet changer with 2 pallets, 130 mm diameter

Direct path measuring system (Heidenhain)
in X, Y, and Z axes, supplied with sealing air

Coolant Systems

KNOLL cooling system, consisting of*:

- 1 hinged belt or scraper chip conveyor with lift pump and chip removal to the operator side (Type: 500 K-1/10, year of manufacture 2010)

- 1 through-spindle coolant supply with coolant pump KTS25-50T, output 31 l/min at 70 bar, 5.5 kW coolant pressure, 3-switchable stages

- 1 external cooling with coolant pump, output 100 l/min at 1.4 bar

- 1 coolant shower with coolant pump, output 100 l/min at 1.4 bar

- 1 compact filter KF200, filter capacity 200 l/min

- 2 spiral chip conveyors in the machine, standard option

Measuring in the Machine

- RENISHAW OMP 60 probe for automatic workpiece zero-point setting and measurement, can be loaded into the spindle via tool changer

- OMRON pressure gauge for tool length measurement and tool breakage monitoring

Modifications and errors in technical specifications and information, as well as prior sale, are subject to change!

โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้