รถตักแบบแขนยืดได้

Merlo TF 33.7-115

Operating hours: 682, Initial registration: 07.11.2024. Standard equipment / technical data: Maximum load capacity 3,300 kg, maximum lifting height 6,600 mm, maximum reach 3,500 mm, length to carriage 4,310 mm, width 2,100 mm, height 2,120 mm, total weight with load forks 6,500 kg, total weight without load forks 6,330 kg. Engine: 4-cylinder Deutz TCD 3.6, 3.6 l displacement, water-cooled, power: 85 kW (115 hp), 2,300 rpm, Stage V, diesel particulate filter, oxidation catalyst and SCR catalyst with AdBlue injection (DPF + DOC + SCR). Hydrostatic drive: Pump electronically controlled with variable displacement, motor: variable motor, EPD TOP including optional automatic speed increase. Mineral hydraulic oil HVI 46. Transmission: 2 gears, electro-hydraulically controlled, Vmax = 1st gear / 2nd gear = 16 / 20 km/h, optional 40 km/h. Cabin: Enclosed cabin, split door, 360-degree all-round visibility, GRAMMER air-suspended seat with safety lap belt, ROPS/FOPS approved, heating, front, roof and rear window wipers, sun visor, 4x1 joystick, electronic with capacitive release including direction of travel switch. Telescopic boom: 2-piece with electronic end-of-stroke damping (Soft Stop). Carriage: quick-change system, type "ZM2", hydraulically controlled from the cabin. Steering: hydraulic steering, 3 steering modes: all-wheel drive, front-wheel drive, crab steering. Drive: permanent all-wheel drive. Axles: front axle fixed, rear axle oscillating. Braking system: servo-assisted disc brakes on all four drive axles, automatically acting parking brake when the engine is stopped. Hydraulic system: pump with variable displacement, type "LOAD SENSING", flow rate work hydraulics: 125 l/min, flow rate hydraulic fan: 46 l/min, total flow rate: 171 l/min, working pressure: 210 bar, flow-sharing control block. Electrical system: 12 V, battery with 100 Ah, alternator 120A, stabilization control: simplified Merlo ASCS system (ASCS-light) with fully electronic stability control, audiovisual signal, attachment recognition and overload cut-off. Tires: 400/70-20. Standard equipment: servo brake, hydraulic oil cooler, rear plate for mounting a trailer hitch, hydraulic reversing fan, radio preparation, work lights on the cabin (2 front, 2 rear), V2001 preparation for additional function on the boom head, 2 hydraulic connections on the boom head, load protection grid on the carriage, lighting for road travel, automatic battery disconnect switch, electrical connection cable in the boom, acoustic signal when reversing, boom cylinder support for securing. Optional equipment: EU approval as a tractor / agricultural tractor 40 km/h including trailer hitch, height adjustable, self-locking, 30/32 mm pin, including connection for trailer lighting, air conditioning, vibration damping on the boom (B.S.S.), LED rotating beacon on the cabin roof (approval is the customer's responsibility!), LED work lights on the cabin (2 front, 2 rear) instead of the standard halogen spotlights, 2 work lights at the end of the first arm (basic arm), rear hydraulic connection with separate control.
Nsdpfx Aezdmtpjitodb

โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้