ศูนย์กลึงและกัด CNCMori Seiki
ZT 1500 YB / bar loader
ศูนย์กลึงและกัด CNC
Mori Seiki
ZT 1500 YB / bar loader
ปีที่ผลิต
2006
สภาพ
ใช้แล้ว
(ทำงานได้เต็มประสิทธิภาพ)
ที่ตั้ง
Sevilla 

ข้อมูลพื้นฐาน
- ชื่อเครื่องจักร:
- ศูนย์กลึงและกัด CNC
- ผู้ผลิต:
- Mori Seiki
- รุ่น:
- ZT 1500 YB / bar loader
- ปีที่ผลิต:
- 2006
- สภาพ:
- สภาพดีมาก (มือสอง)
- ประสิทธิภาพการทำงาน:
- ทำงานได้เต็มประสิทธิภาพ
ราคาและสถานที่
- ที่ตั้ง:
- Plaza Axati 3, 2A, 28001 Sevilla, España

โทร
รายละเอียดข้อเสนอ
- รหัสประกาศ:
- A23351462
- อัปเดต:
- อัปเดตล่าสุดเมื่อ 18.11.2569
คำอธิบาย
* Mori Seiki ZT 1500 YB.
* Opposed-spindle machine.
* Spindle size A2-6, twin spindles.
* 2 stacked turrets.
* 9-axis controlled turning and milling center.
* 2 turrets.
* Y-axis upper turret.
* 2 C-axes.
* Bar capacity: 65 mm.
* Two integrated 15 kW motors.
* Tool life management and tool wear monitoring.
* Two Renishaw automatic tool measurement arms.
* Mapps 4 conversational automatic programming system.
* Automatic force control and tool wear monitoring.
* Oil cooler for both spindles.
* 340 Nm cutting torque.
* 15-position turret, all positions motorized.
* Automatic workpiece collector.
* 1.5-meter bar loader.
* Interface for bar loader installation.
* Rear automatic part pick-up with special gripper for long parts.
* Max. turning diameter: 320 mm.
* Turning length: 810 mm.
* Mori Seiki MSX-701 III control.
* Max. distance between main spindle and counter spindle: 920 mm.
* Main spindle speed: 5,000 rpm.
* Counter spindle speed: 5,000 rpm.
* X1 travel: 210 mm.
* Y1 travel: +50 / -50 mm.
* X2 travel: 210 mm.
* Counter-spindle travel: 920 mm.
* Number of powered tool stations: 2 x 15.
* Capable of holding 30 tools per turret.
* Large selection of external and internal tool holders.
* Large selection of axial and radial motorized blocks.
* Approximate value of equipment: 18,000 euros.
* Speed range of powered tools: 5,000 rpm.
* Drive motor for powered tools: 5.5 kW.
* Rapid traverse X1, X2: 25,000 mm/min.
* Rapid traverse Y1: 20,000 mm/min.
* Rapid traverse Z1, Z2: 30,000 mm/min.
* C-axis resolution: 0.001°.
* High-precision Hainbuch collet chucks on both spindles.
* External and internal tool holders.
* Motorized axial and radial blocks.
* Communication ports via USB, PCMCIA card, and RS-232.
Iedo Akyghopfx Ai Njbd
* Rear chip conveyor.
* Power transformer, documentation, parts list, electrical schematics,
programming, and operating manual.
* Machine in very good condition.
* Machine weight 6.5 tons.
* Machine available for inspection while in operation.
โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้
* Opposed-spindle machine.
* Spindle size A2-6, twin spindles.
* 2 stacked turrets.
* 9-axis controlled turning and milling center.
* 2 turrets.
* Y-axis upper turret.
* 2 C-axes.
* Bar capacity: 65 mm.
* Two integrated 15 kW motors.
* Tool life management and tool wear monitoring.
* Two Renishaw automatic tool measurement arms.
* Mapps 4 conversational automatic programming system.
* Automatic force control and tool wear monitoring.
* Oil cooler for both spindles.
* 340 Nm cutting torque.
* 15-position turret, all positions motorized.
* Automatic workpiece collector.
* 1.5-meter bar loader.
* Interface for bar loader installation.
* Rear automatic part pick-up with special gripper for long parts.
* Max. turning diameter: 320 mm.
* Turning length: 810 mm.
* Mori Seiki MSX-701 III control.
* Max. distance between main spindle and counter spindle: 920 mm.
* Main spindle speed: 5,000 rpm.
* Counter spindle speed: 5,000 rpm.
* X1 travel: 210 mm.
* Y1 travel: +50 / -50 mm.
* X2 travel: 210 mm.
* Counter-spindle travel: 920 mm.
* Number of powered tool stations: 2 x 15.
* Capable of holding 30 tools per turret.
* Large selection of external and internal tool holders.
* Large selection of axial and radial motorized blocks.
* Approximate value of equipment: 18,000 euros.
* Speed range of powered tools: 5,000 rpm.
* Drive motor for powered tools: 5.5 kW.
* Rapid traverse X1, X2: 25,000 mm/min.
* Rapid traverse Y1: 20,000 mm/min.
* Rapid traverse Z1, Z2: 30,000 mm/min.
* C-axis resolution: 0.001°.
* High-precision Hainbuch collet chucks on both spindles.
* External and internal tool holders.
* Motorized axial and radial blocks.
* Communication ports via USB, PCMCIA card, and RS-232.
Iedo Akyghopfx Ai Njbd
* Rear chip conveyor.
* Power transformer, documentation, parts list, electrical schematics,
programming, and operating manual.
* Machine in very good condition.
* Machine weight 6.5 tons.
* Machine available for inspection while in operation.
โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้
ผู้จัดหา
หมายเหตุ: ลงทะเบียนฟรีหรือเข้าสู่ระบบ, เพื่อเข้าถึงข้อมูลทั้งหมด
ลงทะเบียนตั้งแต่: 2019
3 ประกาศออนไลน์
ส่งคำขอ
โทรศัพท์ & แฟกซ์
+34 955 8... โฆษณา
ประกาศของคุณถูกลบเรียบร้อยแล้ว
เกิดข้อผิดพลาด


















