เครื่องกลึงกลาง

OPTITURN TH 4010V

OPTIturn TH 4010D Lathe
Precision, geared lathe with digital position display, center height/distance 205 mm / 1000 mm, motor power 2.4 kW, 400 V, spindle speed 45-1800 rpm, spindle bore Ø 52 mm, spindle foot brake, with automatic longitudinal and cross feeds, CAMLOCK chuck mount, universally applicable workshop machine. Includes machine base with chip drawer, LED work light, coolant system, etc.

Fully equipped engine lathes.
Hardened and ground bed guideways
Spindle mount: Camlock DIN ISO 702-2 No. 5
Guaranteed spindle nose runout accuracy better than 0.015 mm
Gears and shafts hardened and ground, running in oil bath on precision bearings
Motor circuit breaker
DC 24 Volt electrics
Lockable main switch
Spindle direction (right/left) switchable at bed carriage
Removable chip tray with guide rails
Safety handwheels with disengage function on X and Z axes
Emergency stop pedal
Machine base with tool compartment on the right side.

Digital Position Display DPA 21
User-friendly membrane keypad, splash-proof, sealed and glare-free
Increased working accuracy
Reduced error rate thanks to clear layout
X, Y/Z0, Z axes with separate 8-digit displays
Supplied sensor for spindle speed detection
Glass scales on all three axes

Connection voltage: 400 V
Drive power: 2.4 kW
Protection: 16 A
Spindle taper: MT 6
Spindle mount: Camlock No. 5
Spindle bore: 52 mm
Center height: 205 mm
Center distance: 1000 mm
Swing over bed: Ø 410 mm
Swing over cross slide: Ø 270 mm
Fpsdpfx Aioykngrj Seh
Swing without gap bridge: Ø 540 mm
Turning length in bed gap: 165 mm
Bed width: 206 mm
Spindle speed: 45 – 1800 rpm
Number of gear steps: 16
Top slide travel: 100 mm
Cross slide travel: 195 mm
Longitudinal feed: 0.043 – 0.653 mm/rev
Number of longitudinal feeds: 48
Cross feed: 0.015 – 0.206 mm/rev
Number of cross feeds: 48
Metric thread pitches: 0.4 – 7 mm/rev
Number of metric thread pitches: 42
Imperial thread pitches: 70 – 4 tpi
Number of imperial thread pitches: 42
Maximum tool shank height: 16 x 16 mm
Tailstock taper: MT 3
Tailstock quill stroke: 130 mm
Quill diameter: Ø 45 mm
Dimensions (L x W x H): 1920 x 740 x 1555 mm
Weight: 750 kg

โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้