เครื่องผลิตขึ้นรูปโปรไฟล์สำหรับโปรไฟล์ PVC แข็ง

Weber & Blake DS-85 & 203-3-4,0 & 303-1600-270

A reconditioned and functional profile line for rigid PVC-profiles, consisting of:

Twin-screw extruder, parallel
Manufacturer: Hans Weber Maschinenfabrik GmbH
Type: DS 85
Year of manufacture: 1979/2022
Dkedpex Rx D Ajfx Aamog
Machine no.: 85-399
Screw geometry: for PVC-hard powder
Screw diameter: 2 x 85 mm
Screw length: 17 x D
Screw speed: max. approx.30 rpm
Screw torque: 10000 Nm
Motor power: 3.8 - 23.0 kW
Drive motor: commutator motor Elektra Faurndau
Cylinder heating/cooling zones: 4/2 (air cooling with fan)
Tool heating zones: 8
Temperature control: 12 x digital temperature controllers PMA KS40
Accessories: Mass pressure sensor and mass temperature sensor
Connected load: approx. 60 kW (without tool)
Extrusion height: 1100 mm
Output capacity: approx. 150 - 180 kg/h for PVC-hard profiles
Accessories: Material hopper and connection flange
Accessories: Vacuum pump (1.1 kW) incl. material separator
Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hopper
Total weight: approx. 4000 kg
Note: The electrical control cabinet was completely renewed
approx. 3 years ago. Since then, the extruder has only been in
operation for 216 hours.
Condition: recondition and checked for function

Vacuum Calibration Unit
Manufacturer: Blake Kunststoffproduktionsanlagen
Type: 203-3-4,0
Year of manufacture: 1997
Serial number: 758
Total length: 5600 mm
Vacuum pumps: 3 x 5.5 kW
Longitudinal adjustment: electromotive
Height/lateral adjustment: front and rear via threaded
spindle and handwheel
V2A tub: interior/exterior width: 450/700mm, length: 4500 mm
Connected load: approx. 20 kW
Total weight: approx. 3.000 kg
Condition: recondition and checked for function

Caterpillar Haul-Off
Manufacturer: Blake Kunststoffproduktionsanlagen
Type: 303-1600-270
Year of manufacture: 1997
Pulling force: approx. 40,000 N
Pads width: 300 mm
Passage width: max. 500 mm
Passage hight: 100 mm
Effective contact length: 2400 mm
Haul-off speed: max. approx. 8.0 m/min.
Extrusion height: 1000 – 1200 mm
Caterpillar clamping: pneumatic, at the front and back
Dimensions: 4000 x 1200 x 2300 mm (LxWxH)
Weight: approx. 3000 kg
Condition: recondition and checked for function

Profile cross-section, max.: approx. 500 x 100 mm

Note:
The vacuum calibration unit, including caterpillar pull-off, can also be purchased separately.