รถพ่วงดั๊ม

Cheval Liberté Debon 155x305cm 2,0t E-Pumpe Gitter 60cm AKTION

Product information "Debon rear tipper DK 155x305cm 2,0t|E-Pump|Grid|Action"
Rear tipper DK 155x305cm 2,0t|E-Pump|Grid|Promotion
The DK tipper trailer is an extremely practical and safe two-axle car trailer made of aluminum. The generous loading area measures 3.05 x 1.55 meters and the rear tipper can be positioned particularly flexibly for unloading. The folding side walls are 30 centimetres high.
With an unladen weight of 530 kilograms, the tipper trailer can be loaded with a payload of up to 1,470 kilograms. The front wall facing the towing vehicle is specially raised. The wooden floor plate of this reverse tipper is covered with a steel plate. The floor frame profile is equipped with six lashing brackets.
Convenience is a top priority
The loading area can be tilted backwards using an electric pump. An overrun brake prevents the towing vehicle from being pushed by the load when stopping or on slopes. All load-bearing steel frame parts are hot-dip galvanized.

Special features
Double-walled anodized aluminium drop sides
Rear tipper with electric pump + battery
Heavy-duty support wheel
Mounted grid attachment
Further equipment
Drop sides Removable, folding
Stable screen-printed floor / sheet steel floor on the floor plate
Axle and drawbar completely hot-dip galvanized
Ncsdpoi R Hv Nefx Amler
6 tie-down points in the floor
12 volt electrics, 13-pin plug with reversing light
Frame welded and completely hot-dip galvanized.
Other documents
Vehicle registration certificate part 2 /
Accessories available at extra cost - see below -
If you would like to buy this trailer or have further trailer queries, please use our internal tipper trailer "No. 1667".

โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้