เครื่องดัดท่อ

CORMAK RBM30HV

Electric bending machine for bending pipes and profiles, bars and flat bars depending on the rolls - bending stones used. The machine is additionally equipped with mechanical pressure on the upper roll with vernier. Ideal for bending curves, circles, spirals, etc. Complete with foot pedal for left/right drive control. Used in locksmith shops and on construction sites. Max pipe bending range up to 30 mm. The bending machine allows working both vertically and horizontally.

Machine characteristics

Electric bender for bending profiles and pipes. The bender allows working in both vertical and horizontal planes. The machine is equipped with mechanically adjustable pressure on the upper roll. Ideal for bending curves, circles, spirals.

Bending radius adjustable by means of top pressure device with vernier scale.
Application: Bending of profiles and tubes
Different profiles can be bent by means of universal rollers
Very high unladen weight for optimum stability
Ground and hardened directional rollers on the sides,
Bending rollers made of robust and hardened steel
Operation via foot pedal
Vertical and horizontal operation
Left/right operation

Standard equipment

Side guide rollers
foot pedal
Driver's manual in Polish
CE declaration

Technical data
Round tube [mm] 30 x 1
Rectangular profile [mm] 30 x 30 x 1
Round bar [mm] 16
Solid rectangular piece [mm] 30 x 10
Shaft diameter [mm] 30
Kdjdpfx Ageu Snlke Dew
Rotation [rpm] 9
Motor power [kW] 0.75 kW
Power supply 3 phase, 400V
Dimensions (L x W x H) [mm] 1200 x 750 x 1210
Weight [kg] 252