เครื่องกลึงแนวตั้ง

EMAG VLC 400

turning diameter 400 mm
turning height 300 mm
swing diameter 520 mm
workpiece weight 60 kg
x-axis 995 mm
y-axis +/-30 mm
z-axis 580 mm
chucking diameter max. 500 mm
Tool drive speed max. 6.000 1/min
Main spindle drive power 37 KW
tool turret with 12 work positions BMT75
total power requirement 55 kW
weight of the machine ca. 13,5 t
Circulating workpiece transport system, O-design
Gkodpswbiztofx Ahuoc
Drag frame system for 10 workpieces
Coolant supply: 15 bar
Coolant pump with a flow rate of approx. 80 l/min at 15 bar.
Cooling unit (6.5 kW, water-air)
A cooling unit (with dual-circuit technology) regulates the machine's thermal balance.
The spindle drive, control cabinet, and turret are maintained at ambient temperature (10°C - 40°C).
Dual coolant filter, manually switchable
Filter mesh 100 µm, with electrical and mechanical contamination indicator
Chip conveyor
Hinged belt design: to the rear
Chip discharge height 1,100 mm. (with integrated coolant reservoir, capacity approx. 500 l)
Emulsion mist extraction: Extraction capacity approx. 800 m3/h
Flushing gun
Workpiece measurement with measuring probe
Blow-off measuring probe
Tool life monitoring (sister tool management)
Tool breakage monitoring TOOLINSPECT MCU-EUROPA
Axial drilling and milling head - BMT75 CC
5x 90° angle drilling and milling heads - BMT75 CC (i=1:1)
Tool set for OP10 + OP20

Hydraulic full clamping cylinder size 150 - with 1 media feed-through
Max. tensile force 10,850 daN at 70 bar

Coolant through the spindle
Programmable clamping pressure adjustment

3-jaw power chuck KNCS-N 500-155 quick-change
Max. = 2,200 rpm (standard speed according to DIN 6386)
Set of hard base jaws
Set of soft top jaws

Attachments for KNCS-N 500-155
Flushing nozzle in chuck bore

Additional tool holders with tools:
1x 8.BMT25VL8IKX50 External finishing cutter
1x 8.BMT25VL8IKX50 External roughing cutter
1x 60.7516VL8IKDI15 Engraving tool
1x 60.7516VL8IKDI15 Tapping chuck
1x 40.75V5KRVL8IKD 50mm cutter head
3x 80.75V5VL8IKD boring bar holder
2x 27.V520HYDL26 drill bits, 20mm diameter
1x 42.V522L08Ik drill bits, 22mm diameter
1x 27.V514WNL31 Drill Bit Diameter 14mm

Software Package
Operating Instructions / Maintenance Manual