เครื่องตัดเหล็กรูปพรรณ

GEKA Semipaxy 1000x400 mm B&R 15"

neu
ca. 10 Wochen ab Auftrags
Spanien
24700 €
474.24 €
1000 mm
400 mm
12 m/min
0,2 mm
0,1 mm
300 kg
The Semi Paxy table is a positioning unit with CNC control unit which may be factory fitted onto any GEKA punching machine with a 500 mm or larger throat.

THE ASSEMBLY CONSISTS OF:

* Mounting plate.
* Table assembly with “X” and “Y” axis driven by servo motors.
* B&R Power Panel 500 PC based 15” touch screen control
* Each axis “X” and “Y” has servo motors with built encoder for precise measurement.
* Electric cabinet

THE WORK PROCESS IS AS FOLLOWS:

* The position of the holes to be punched is programmed either in absolute or incremental dimensions.
* When the control is started up, the guide stops are positioned for first hole.
* The material to be punched is placed against guide stops and the punching pedal is activated, the ram then cycles.
* After the punch has returned to the pre-set clearance height, the table guide stops move to the next programmed position.
* Repeat this sequence until all holes are punched.

B&R PC BASED 15” TOUCH SCREEN CONTROL MAIN FEATURES:

*

* B&R Power Panel 500
* Integrated keyboard
* Windows embedded operating system
* 15” colour touch screen WXGA resolution
* Compact Flash Memory.
* USB front port
* Ethernet port
* Easy and user friendly interface
* Programming is made through Line Pro software developed by Geka
Nsdpfx Ajynmrheh Sjwc
* Importing of dxf/dstv files
* Network connectivity
* Remote assistance via the internet

* Run, design, jog, configuration and alarm modes

ELECTRIC CABINET

* Electric cabinet containing power and control equipment for the axis positioning and control of the machine
* Includes Allen-Bradley Guarmaster® safety relays
* Electric cabinet is mounted inside Hydracrop’s or Puma’s frame. If machine is retrofitted, the electric cabinet is mounted out of the machine’s frame.
* Standard input power is 400 V - 50 Hz - 3 phases. In case different input requirement is needed, let us know

LINE PRO MAIN FEATURES:

* It is a visual and a very easy to use application with graphic representations.
* It shows the operator the image of the piece that is being designed.
* All the process of the part (from designing to manufacturing) can be done and controlled directly from the Positioning Control.
* Importing of dxf and dstv files available according to designing
specifications of the software.
* It is easier to make changes on holes that have been already designed and the operator can easily identify any mistake on the part; as he is watching physically on the screen all the steps of the process of manufacturing of the part.
* Line Pro can be installed in a PC for later on sending the file via the network
or with a USB stick to the machine
*

Other X- and Y- ranges are also available, please ask for an offer.