HAAS DS30Y

HAAS DS30Y

This 4-axis HAAS DS30Y horizontal turning machine was manufactured in 2023. It features a maximum part swing of 533 mm and a maximum cutting diameter of 349 mm. The machine is equipped with a robust turret that accommodates 12 tools, ensuring versatility in operations. If you are looking to get high-quality turning capabilities, consider the HAAS DS30Y machine we have for sale. Contact us for further details.

• Capacities:
• Chuck size (main): 10.0 in / 254 mm
• Max part swing: 21.0 in / 533 mm
• Max cutting diameter (with BMT65 turret): 13.75 in / 349 mm
• Max cutting length (varies with workholding): 32.5 in / 826 mm
• Bar capacity: 3.00 in / 76 mm
• Between centers: 32.5 in / 826 mm
• Feedrates (rapids):
• X: 472 ipm / 12.0 m/min
• Y: 472 ipm / 12.0 m/min
• Z: 945 ipm / 24.0 m/min
• Axis motors (max thrust):
• X: 4100 lbf / 18238 N
• Y: 2300 lbf / 10231 N
• Z: 5100 lbf / 22686 N
• Main spindle:
• Spindle nose: A2-6
• Drive system: Direct speed, belt drive
• Max torque: 275 ft-lbf @ 500 rpm / 373 Nm @ 500 rpm
• Draw tube bore: 3.0 in / 76 mm
• Spindle bore: 3.50 in / 88.9 mm
• Main spindle C axis:
• Max speed: 60 rpm
• Max rating: 5.0 hp / 3.7 kW
• Positioning (±): 0.01°
• Brake diameter: 13.9 in / 353 mm
• Brake holding torque: 250 ft-lbf / 339 Nm
• Control type: Interpolated motion and positioning
• Secondary spindle:
• Chuck size: 8.3 in / 210 mm
• Spindle nose: A2-5
• Drive system: Direct speed, belt drive
• Max rating: 15.0 hp / 11.2 kW
• Max speed: 4000 rpm
• Max torque: 100 ft-lbf @ 870 rpm / 135.6 Nm @ 870 rpm
• Spindle bore ø (non-through): 0.81 in / 20.7 mm
• Secondary spindle C axis:
• Max rating: 5.0 hp / 3.7 kW
• Max speed: 60 rpm
• Positioning (±): 0.01°
• Brake diameter: 8.5 in / 216 mm
• Brake holding torque: 140 ft-lbf / 190 Nm
• Control type: Interpolated motion and positioning
• Secondary spindle positioning (M119):
• Positioning (±): 0.02°
• Brake diameter: 8.5 in / 216 mm
Dwsdpfx Anezh Eh Te Hsc
• Control type: Positioning only
• Turret:
• Number of tools: 12 stations
• OD vs ID tools: Any combination (will vary with turret)
• Boring bar rear clearance (from back of turret): 4.00 in / 102.0 mm
• Live tooling:
• Max speed: 4000 rpm
• Drive ratio: 1:1
• Tooling: BMT65
• General:
• Coolant capacity: 55 gal / 208 L
• Air requirements:
• Air required: 4 scfm @ 100 psi / 113 L/min @ 6.9 bar
• Inline air hose: 3/8 in
• Coupler (air): 3/8 in
• Minimum air pressure: 80 psi / 5.5 bar
• Electrical specification:
• Spindle speed: 4500 rpm
• Drive system: Direct speed, belt drive
• Spindle power: 30.0 hp / 22.4 kW
• Input AC voltage (3-phase) – low: 220 VAC; full load amps: 70 A
• Input AC voltage (3-phase) – high: 440 VAC; full load amps: 35 A
• Dimensions – shipping:
• Domestic pallet: 171 in x 90 in x 98 in / 434 cm x 229 cm x 249 cm
• Export pallet: 171 in x 90 in x 98 in / 434 cm x 229 cm x 249 cm

Technical Specification
Counter Spindle Yes
Driven Tools Yes