ระบบสายพาน - เครื่องคลายม้วนและเครื่องปรับตรง, เครื่องคลายม้วนสำหรับวัสดุม้วน, เครื่องปรับแผ่นเหล็ก,

HMS 450 x 6

Strip Processing Line - Decoiler and Straightening Machine
Year of manufacture: 1991
Strip width: 50 to 450 mm
Sheet thickness with straightener inactive: 6 mm
Sheet thickness with straightener active: 2 mm
- Excellent equipment and feed-in aids
Required floor space for the complete line (L x W): approx. 7000 x 3000 mm
Total weight of the system: approx. 11 tons
Good condition

Straightening Machine HMS Type RS 47-04/1, Machine No.
Strip width, nominal: 400 mm
Strip width, max. pass-through: max. 455 mm
Strip thickness at 400 mm width: max. 1.5 mm (steel)
Strip thickness at 400 mm width: max. 2 mm (copper)
Speed: max. 40 m/min
Number of straightening rollers: 7 pcs
Straightening roller diameter: Ø 40 mm
Number of pinch rollers: 2 pcs
Pinch roller diameter: Ø 80 mm
Entry height, pass height: 1500 mm
- Straightening rollers hardened, ground, and hard-chromed, with central support
- Pinch rollers hardened, ground, and hard-chromed, with hydraulic disengagement
- Manual straightening roller gap adjust
- Feed-in aid with hydraulically extendable tongue and hydraulically adjustable deflection roller
- Adjustable side strip guide
- All straightening rollers driven via distribution gearbox with cardan shafts
- Both pinch rollers driven via gearbox with cardan shafts
- Frequency-controlled drive via geared motors
- Straightening machine opening stroke 250 mm for cleaning or processing thicker material, stroke movement via trapezoidal thread spindle
- Ultrasonic loop control
Transport dimensions (L x W x H): 3600 x 2200 x 2200 mm
Gjdpfx Adsif Sg Soieua
Nett weight: approx. 4 tons

Decoiler HMS Type BA 1.5-06/80, Machine No.
Coil weight: max. 8000 kg
Coil outside diameter: max. 1600 mm (with coil car)
Coil outside diameter: max. 2000 mm (without coil car)
Coil turntable diameter: Ø 1700 mm
Coil inside diameter, expanding range: 460-520 mm
Coil width, nominal: max. 630 mm
Spreader jaw width: 750 mm
Height of the decoiler drum above base plate: 1500 mm
- Decoiler drum driven by hydraulic motor and gear
- Pneumatic run-on brake on decoiler drum, TWINFLEX
- Hydraulic expansion of the decoiler drum, centrally via wedge slider system
- Hydraulic hold-down arm with hydraulically driven double pendulum roller
- Coil car with 12 tons lifting force and 300 mm stroke
- Decoiler frame above floor with motorized cross travel drive
Transport dimensions (L x W x H): 3500 x 1900 x 2500 mm
Nett weight: approx. 5 tons

Central hydraulic unit, adjacent
Tank capacity: 350 liters
Motor power: 18.5 kW
- Drive motor with 2 REXROTH pumps (tandem pump)
- Oil cooler as air heat exchanger with fan motor
Transport dimensions (L x W x H): 1600 x 850 x 1450 mm
Nett weight: approx. 800 kg

Electrical cabinet, adjacent
- All cable connections via Harting connectors
Transport dimensions (L x W x H): 2800 x 500 x 2250 mm
Nett weight: approx. 800 kg

โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้