เครื่องดัดท่อ

PBS Tubobend 30 BF simply smart

Semi-automatic tube bending machine for tubes up to 30 mm
with extended bending clearance, especially for meander bending

Standard equipment:
• Operation via Siemens Touch Panel KTP 600
• Function keys and plain text display for operator guidance
• Program memory internally for 100 programs with 20 data sets each
• Bending axis electronically controlled
• Automatic bending angle adjustment
Nsdszichaspfx Aknjda
• Target/actual value display for bending angle
• Control panel swiveling
• Bending head freestanding
• Tube clamping hydraulically, clamping pressure adjustable
• Guide block adjustment hydraulically
• Bending mandrel extension hydraulically
• Machine can be used in a mobile manner
• Extended bending clearance for bending radii up to R max = 200 mm

1 TUBOBEND 30 with tube feed length 1,500 mm

Technical data:
Tube range up to: 30.0 x 3.0 mm (E 235 with Rm = 2xD)
Bending radius up to: 200 mm
Control: electronic
Effective bending angle (max.): 180° (+10° overbending)
Switch-off accuracy: ± 0.1°
Bending speed (max.): 45°/s
Dimensions L/W/H: 2200 / 600 / 1100 mm
Weight: approx. 500 kg
Power: 1.5 kW
Connection data: 400 V / 50 Hz / 3 phases
Mains fuse: CEE 16 A
Color: RAL 5015 blue

Optional equipment

1 piece. Length stop device, length 1500 mm
1 piece. Early mandrel retraction to optimize arc quality
• For use with ball mandrels
• Mandrel is automatically retracted during the bending process
• Adjustment up to 10° continuously programmable
1 piece. Automatic mandrel lubrication as a minimum quantity lubrication system
Pneumatic dosing device HP-Microspray (compressed air connection required)
1 piece. Safety foot switch for clamping and bending function
1 piece. Adjustable bending speed

Note/Remark:
The tube is approximately 500 mm round at the beginning and end of the bend
(tube and tool = Ø 33.7 mm).
The tube is only flattened into a flat oval tube in the spiral.
The spiral only has one bend at each end.
Bending of return bends is not possible.
Since the tube is round, a pre-rotation can be performed to compensate for the slope.
The position of the bend or the spiral must be determined using an external device.

โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้