เครื่องดัดแผ่นโลหะ

Placke HQPB 4 60t x 1550mm P786

Small, powerful all-rounder! Also suitable for multi-station operation!

The High Quality Press Brake, or HQPB for short, is the top model in the Placke range of press brakes. The entire manufacturing process, from the hydraulic cylinder to the control cabinet construction, takes place in-house. By using state-of-the-art technology, combined with many years of experience in the field of forming technology, the HQPB series enables you to bend at the highest level.
Even the standard basic model is a fully functional press brake. This combination of safety, reliability and efficiency, together with easy operation, allows us to meet the highest requirements and accuracies in the bending process.

Press force: 600 kN (60 t)
Working length: 1,550 mm
Distance between uprights: 1,200 mm
Installation height: 400 mm
Overhang: 255 mm
Ram stroke: 215 mm
Lower bed height above floor: 947 mm
Rapid traverse max.: 250 mm/s
Pressing traverse max.: 9.8 mm/s
Retract traverse max.: 170 mm/s
Ram positioning accuracy: ± 0.01 mm
Ram inclination: ± 10 mm (electrically limited to ± 5 mm)
Motor power: 5.5 kW
Hydraulic oil tank capacity: 120 l
Operating voltage: 400 V / 3 Ph / 50 Hz
Machine weight: approx. 7 t

Description:
> Machine body: Steel S 355 N
Design based on FEM analysis
Side stands with two pressure tubes
Floor-standing
2-component structural paint RAL 7004 / 7016
> Hydraulics & upper beam
Proportional valve control, electronically monitored cylinder synchronization
Press beam stress-relieved annealed, Heidenhain scales
Separate Y1/Y2 control, inclination monitoring
> Tooling
Top: WILA hydraulic, NSCL-II-HC, fully hardened
Bottom: narrow table, single V (13 × 20)
Reinforced lower bed, no mechanical deflection required
> Support arms
2 aluminum support arms at the front, approx. 600 mm, with tilting stops
Can be moved on ball bearing linear guide
Height-adjustable for dies from 55 to 100 mm
> Back gauge 2-axis
X-axis 950 mm, 300 mm/s, ± 0.01 mm
Tjdpfx Asz Hnz Dod Rjc
R-axis 200 mm, 150 mm/s, ± 0.01 mm
Z-axis manual with quick clamp, 2 stop fingers
> Control system: Delem DA 66S
24″ touchscreen on swivel arm
2D programming, 3D visualization
DXF import, tandem operation
> Safety
CE-compliant, Pilz safety PLC
TFS laser light curtain, moving with the ram
Rear light curtain
> Control technology
Back gauge with AC servo technology
Compensation for side stand deflection and temperature-related stand expansion
Dynamic press force control, LED work area lighting

including lighting behind the machine

โฆษณานี้ได้รับการแปลโดยอัตโนมัติ อาจมีข้อผิดพลาดในการแปลได้