Center Lathe

ZMM C 10 T.14

neu
ca. 4 Monate ab Auftragse
Bulgarien
138800 €
2623.32 €
1020 mm
2000 mm
510 mm
358 mm
770 mm
560 mm
361 MK
12
6,3 - 3 1/min
2
0.039 - mm/U
0.02 - 7.5 mm/U
76
0.5 - 0 mm
60 - 1/5 Gänge/"
0.125 - 37.5
240 - 4/5
505 mm
270 mm
105 mm
6 MK
225 mm
18.5 kW
6400 kg
Their main purpose is to process pipes. Accordingly, this type of machines is widely used in the oil industry.
Oil country lathes have large capabilities of processing inner and outer cylindrical and conical threads on pipes with large diameters.
The clamping of the pipes with two universals and stands allows the processing of long pipes.
These lathes are suitable for producing elements and equipment for the oil industry, as well as for maintaining such facilities.

Drive via gearbox
Electrodynamic brake
3-axis digital display Fagor

Quick-change tool holder Amestra type D1, system like Multifix including 4 holders (3x rectangular, 1 round)
2 pcs. 3-jaw chuck Bison 3295 Dm. 660 mm on both sides of the spindle,
max. 250 rpm,gripping range 5-400 mm. Option: hard top special jaws (outside only), gripping range 80-400 mm
2 pcs. steady rests on supports Dm. 160 - 360 mm with rollers
Rapid traverses (4)
Longitudinal stop for one position
Taper turning device
Coolant device
Full length rear splash guard
Lead and feed spindle cover
Bsdpfewiq Drex Ahvolp
Lathe chuck protection
Tool holder protection
Leveling bolts and plates
Tailstock
Reducing sleeve for the tailstock sleeve
Mechanical movement of the tailstock with handwheel
Low voltage machine light
Operating instructions
Equipment according to "CE" regulations

Further models with spindle bore from 5 to 358 mm, centre distances from 1000 to 6000 mm and with turning diameters from 730 to 1020 mm are available on request.